RC7ATCBS RC7 Multi Service Poke-Thru Assembly in Brass
Brass and black multi-service poke-thru assembly featuring a 20A duplex receptacle and preloaded Wiremold Open System inserts
The RC7ATCBS is a multi-service poke-thru assembly featuring a brass finish with a black slide cover. This surface-style device is designed for floor installations where a 3 1/16inch (78mm) diameter hole is available. The assembly comes prewired with a 20A duplex receptacle that can be configured as a standard duplex or an isolated ground. This specific model is loaded with Wiremold Open System unloaded inserts, and includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. For installation, the floor covering must have a minimum thickness of 1/8inch. Note that this unit is not designed for use with bare concrete or terrazzo floors.
Specifications are supplied by the manufacturer. For complete details, check the Resources section.Key features
Specifications
| Depth | 16 in (40.6 cm) |
| Height | 7 in (17.8 cm) |
| Width | 7 in (17.8 cm) |
| Color | Brass and Black |
| TAA Compliant | Yes |
| Certifications | TAA |
| Warranty | 1-Year from Installation or 2-Years from Day of Sale |
Resources
Questions about this part
What is the hole requirement for the RC7ATCBS installation?
The RC7 Series Poke-Thru Devices require a 3 1/16inch (78mm) diameter hole for proper installation.
What is included with this assembly for data connectivity?
The assembly includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters.
Can this poke-thru be used on concrete floors?
This specific model is not designed to work with bare concrete or terrazzo.
What are the floor thickness requirements?
The floor covering must have a minimum thickness of 1/8inch.
Does this assembly support isolated ground wiring?
Yes, the prewired 20A duplex receptacle can be wired as either a standard duplex or an isolated ground.