{"title":"AV Extension","description":"\u003cp\u003eAV Extension in Cables. Authorized Legrand AV dealer — real prices, spec sheets and CAD files free to download.\u003c\/p\u003e","products":[{"product_id":"hdmi-hdbaset-usb-c-3-5mm-and-usb-b-to-a-over-cat-extender-wall-plate-transmitter-to-box-receiver-4k-60hz-c2g31011","title":"HDMI® HDBaseT + USB-C®, 3.5mm, and USB-B to A over Cat Extender Wall Plate Transmitter to Box Receiver - 4K 60Hz","description":"\u003cp\u003eThe C2G31011 is a professional-grade HDMI HDBaseT transmitter and receiver set designed to extend high-resolution video and diverse data signals over a single Cat6a cable. This dual-gang wall plate transmitter enables 4K @ 60Hz video extension up to 130 feet using Cat6a, or up to 230 feet when transmitting 1080p signals via Cat5e or Cat6. It facilitates complex installations in conference rooms and lecture halls by extending USB-C (USB 3.1 Gen2), USB 2.0, and 3.5mm audio alongside HDMI. The system supports HDCP 2.2 and HDBT 2.0 technologies to ensure secure, high-bandwidth connections. For installer convenience, the transmitter supports PoH (Power over HDBaseT), allowing the receiver to provide power to the wall plate, which eliminates the need for a local AC adapter at the transmitter location. Audio formats such as Dolby Atmos, DTS:X, and PCM 7.1 are supported through the 3.5mm pass-through. The transmitter features an integrated Micro-USB port for front-panel firmware updates, while the receiver can be serviced via its RS232 port.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends 4K @ 60Hz HDMI and USB-C signals up to 130 ft (39.6 m) via Cat6a, or 1080p up to 230 ft (70.1 m) via Cat5e\/Cat6\u003c\/li\u003e\n\u003cli\u003eTransmits USB 2.0 and USB 3.1 Gen2 video signals, 3.5mm analog audio, and HDMI audio (including Dolby Atmos and DTS:X) over one cable\u003c\/li\u003e\n\u003cli\u003eSupports PoH (Power over HDBaseT) to power the wall plate transmitter from the receiver, reducing installation complexity\u003c\/li\u003e\n\u003cli\u003eFeatures HDCP 2.2 compliance, automatic source switching, and a 10.2 GBPS data transfer rate\u003c\/li\u003e\n\u003cli\u003eDual-gang wall plate design with HDMI, USB-C, USB-B, USB Micro-B, and 3.5mm female connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat is the maximum distance for 4K video with the C2G31011?\u003c\/h3\u003e\u003cp\u003eFor 4K @ 60Hz signals, you can extend up to 130 feet (39.6 m) using a Cat6a cable. For 1080p resolution, the distance increases to 230 feet (70.1 m) using Cat5e or Cat6.\u003c\/p\u003e\u003ch3\u003eCan I use this to extend USB peripherals for KVM control?\u003c\/h3\u003e\u003cp\u003eYes, the system supports high-speed USB 2.0 pass-through over HDBaseT up to 230 feet, allowing for the connection of USB cameras, keyboards, and mice.\u003c\/p\u003e\u003ch3\u003eDoes the transmitter require its own power outlet?\u003c\/h3\u003e\u003cp\u003eNo, the receiver can send power to the wall plate transmitter via PoH, which provides greater flexibility during installation by removing the need for a local AC adapter.\u003c\/p\u003e\u003ch3\u003eWhat types of audio formats are supported by the C2G31011?\u003c\/h3\u003e\u003cp\u003eThe system supports high-fidelity audio including Dolby Atmos, Dolby TrueHD, DTS:X, DTS-HD Master Audio, and PCM 2.0, 5.1, and 7.1 via the 3.5mm connection.\u003c\/p\u003e\u003ch3\u003eWhat cable type is recommended for the longest runs?\u003c\/h3\u003e\u003cp\u003eFor the best performance and longest distances, an HDBaseT Certified Cat6a Patch Cable is recommended, especially in environments with high EMI\/RFI.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915726848278,"sku":"C2G31011","price":653.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/AVD-C2G-C2G31011-ProductImage1.jpg?v=1789975009"},{"product_id":"hdmi-hdbaset-vga-3-5mm-and-usb-b-to-a-over-cat-extender-wall-plate-transmitter-to-box-receiver-4k-60hz-c2g31012","title":"HDMI® HDBaseT + VGA, 3.5mm, and USB-B to A over Cat Extender Wall Plate Transmitter to Box Receiver - 4K 60Hz","description":"\u003cp\u003eThe C2G31012 is a dual-gang wall plate transmitter to box receiver system designed to extend high-definition signals across large environments like conference rooms, lecture halls, and classrooms. This HDBaseT solution allows a single Cat5e, Cat6, or Cat6a cable to carry a 4K HDMI signal, VGA video, and high-speed USB 2.0 data simultaneously. For 4K HDMI at 60Hz, the system supports distances up to 130 feet when using Cat6a cabling. When using Cat5e or Cat6, the unit supports 4K HDMI up to 115 feet and 1080p VGA up to 230 feet. The transmitter features automatic port selection and supports one-way analog audio pass-through from the transmitter to the receiver. Additionally, the receiver supports PoH (Power over HDBaseT), allowing it to send power back to the wall plate transmitter to eliminate the need for a local power adapter at the wall. This setup is ideal for KVM applications, enabling control of USB cameras, keyboards, and mice via USB 2.0 pass-through over distances up to 230 feet.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends 4K @ 60Hz HDMI, VGA, USB 2.0, and audio over a single Cat5e\/6\/6a cable\u003c\/li\u003e\n\u003cli\u003eSupports 4K HDMI up to 130 ft (40 m) with Cat6a or 115 ft (35 m) with Cat6\u003c\/li\u003e\n\u003cli\u003eProvides USB 2.0 pass-through for KVM control up to 230 ft (70.1 m)\u003c\/li\u003e\n\u003cli\u003eFeatures PoH support to power the wall plate transmitter from the receiver\u003c\/li\u003e\n\u003cli\u003eSupports HDCP 2.2 and HDBaseT 2.0 technologies\u003c\/li\u003e\n\u003cli\u003eAutomatic port selection for seamless source switching\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill this extender work with my 4K display?\u003c\/h3\u003e\u003cp\u003eYes, it supports 4K @ 60Hz resolutions and is HDCP 2.2 compliant for secure connections to modern displays.\u003c\/p\u003e\u003ch3\u003eWhat is the maximum distance for 4K HDMI?\u003c\/h3\u003e\u003cp\u003eYou can extend 4K HDMI up to 130 ft (40 m) using Cat6a cabling, or up to 115 ft (35 m) using Cat6.\u003c\/p\u003e\u003ch3\u003eCan I use this to control a USB camera or keyboard?\u003c\/h3\u003e\u003cp\u003eYes, the system provides USB 2.0 pass-through for KVM control of devices like cameras, mice, and keyboards up to 230 ft (70.1 m).\u003c\/p\u003e\u003ch3\u003eDo I need a power supply at the wall plate?\u003c\/h3\u003e\u003cp\u003eNo, the receiver supports PoH, which allows it to send power back to the wall plate transmitter.\u003c\/p\u003e\u003ch3\u003eWhat type of cabling is required for the best performance?\u003c\/h3\u003e\u003cp\u003eWhile Cat5e or Cat6 can be used, an HDBaseT Certified Cat6a Patch Cable is recommended for optimal performance.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915729404182,"sku":"C2G31012","price":578.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/AVD-C2G-C2G31012-ProductImage1.jpg?v=1789975010"},{"product_id":"hdmi-hdbaset-3-5mm-usb-b-to-a-and-rs232-over-cat-extender-box-transmitter-to-box-receiver-4k-60hz-c2g31013","title":"HDMI® HDBaseT + 3.5mm, USB-B to A, and RS232 over Cat Extender Box Transmitter to Box Receiver - 4K 60Hz","description":"\u003cp\u003eThe C2G31013 is a professional HDBaseT transmitter and receiver set designed to extend high-definition signals across long distances. This active device allows a 4K @ 60Hz HDMI source to reach a display up to 230 ft (70.1 m) using a single Cat5e, Cat6, or Cat6a Ethernet cable. This solution is built for environments where standard HDMI cabling reaches its limit, such as lecture halls, conference rooms, and classrooms. Beyond video, this extender carries USB 2.0 data, 3.5mm analog audio, and RS232 control signals over the same line. The transmitter includes a USB-B female port and a USB-A female port on the receiver, facilitating interactive whiteboard connectivity and peripheral use. It supports a variety of audio formats including Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio, alongside PCM 2.0, 5.1, and 7.1. This system provides a robust backbone for complex AV integrations requiring high-resolution video and integrated data control.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends 4K @ 60Hz HDMI, USB 2.0, RS232, and 3.5mm audio up to 230 ft (70.1 m) via a single Cat5e\/6\/6a cable\u003c\/li\u003e\n\u003cli\u003eSupports advanced audio formats including Dolby Atmos, DTS:X, and DTS-HD Master Audio\u003c\/li\u003e\n\u003cli\u003eFeatures HDCP 2.2 compliance and HDMI 1.4 technology for modern high-resolution content protection\u003c\/li\u003e\n\u003cli\u003eTransmits data at a transfer rate of 10.2 GBPS with 4:2:0 chroma subsampling\u003c\/li\u003e\n\u003cli\u003eIncludes USB-B to USB-A extension for seamless peripheral and interactive whiteboard integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill the C2G31013 support 4K resolution?\u003c\/h3\u003e\u003cp\u003eYes, this extender supports video resolutions up to 4K @ 60Hz with 4:2:0 chroma subsampling and HDCP 2.2 compliance.\u003c\/p\u003e\u003ch3\u003eCan I extend USB signals with this HDBaseT extender?\u003c\/h3\u003e\u003cp\u003eYes, the system extends USB 2.0 signals via the USB-B to USB-A configuration, making it suitable for interactive whiteboards.\u003c\/p\u003e\u003ch3\u003eWhat audio formats are compatible with the C2G31013?\u003c\/h3\u003e\u003cp\u003eThe device supports PCM 2.0, 5.1, and 7.1, as well as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio.\u003c\/p\u003e\u003ch3\u003eWhat cable type is required for the 230 ft extension?\u003c\/h3\u003e\u003cp\u003eA single Cat5e, Cat6, or Cat6a Ethernet cable is required to reach the maximum distance of 230 ft (70.1 m).\u003c\/p\u003e\u003ch3\u003eWhat is the difference between the transmitter and receiver ports?\u003c\/h3\u003e\u003cp\u003eThe transmitter (TX) features a USB-B female port, while the receiver (RX) provides a USB-A female port for connecting peripherals.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915731697942,"sku":"C2G31013","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/AVD-C2G-C2G31013-ProductImage1.jpg?v=1789975011"},{"product_id":"hdmi-ultra-slim-hdbaset-rs232-and-ir-over-cat-extender-box-receiver-4k-60hz-c2g31015","title":"HDMI® Ultra-Slim HDBaseT + RS232 And IR Over Cat Extender Box Receiver - 4K 60Hz","description":"\u003cp\u003eThe C2G31015 is an HDBaseT receiver designed to extend high-definition video and audio signals from a 4K source to a display via a single Ethernet cable. This active device is ideal for professional installations in lecture halls, classrooms, and conference rooms where distances exceed the limits of standard HDMI cabling. It supports 4K @ 60Hz resolutions using Cat6a cabling for runs up to 130 ft (40 m), while Cat5e or Cat6 cabling allows for 1080p extension up to 230 ft (70.1 m) and 4K extension up to 115 ft (35 m). This receiver features HDCP 2.2 compliance to ensure secure content transmission and supports advanced audio formats including Dolby Atmos, Dolby TrueHD, DTS:X, DTS-HD Master Audio, and PCM 7.1. With bi-directional PoC (Power over Cable) support, this unit can be powered from either the transmitter or receiver side, providing significant installation flexibility. The device includes an RS232 port for firmware upgrades and management. For optimal performance in high EMI\/RFI environments or long coiled runs, shielded, solid conductor Cat6 or HDBaseT Certified Cat6a cabling is recommended.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends 4K @ 60Hz via Cat6a up to 130 ft (40 m) or 1080p up to 230 ft (70.1 m) via Cat5e\/6\u003c\/li\u003e\n\u003cli\u003eSupports advanced audio formats including Dolby Atmos, DTS:X, and DTS-HD Master Audio\u003c\/li\u003e\n\u003cli\u003eBi-directional PoC support allows power from either the transmitter or receiver end\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant for secure 4K content transmission and HDMI 1.4 support\u003c\/li\u003e\n\u003cli\u003eFeatures RS232 port for remote firmware upgrades and system management\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill this C2G31015 receiver work with my HDBaseT transmitter?\u003c\/h3\u003e\u003cp\u003eYes, this receiver is compatible with C2G30014, C2G30017, C2G30018, C2G30021, and C2G30022 transmitters.\u003c\/p\u003e\u003ch3\u003eWhat cable type is required for 4K @ 60Hz extension?\u003c\/h3\u003e\u003cp\u003eFor 4K @ 60Hz distances up to 130 ft (40 m), Cat6a is required. For 4K up to 115 ft (35 m) or 1080p up to 230 ft (70.1 m), Cat5e or Cat6 is sufficient.\u003c\/p\u003e\u003ch3\u003eDoes this unit require a separate power supply at the display?\u003c\/h3\u003e\u003cp\u003eNot necessarily. Due to bi-directional PoC support, you can power the system from the transmitter side, eliminating the need for a local power outlet at the receiver.\u003c\/p\u003e\u003ch3\u003eWhat audio formats are supported by the C2G31015?\u003c\/h3\u003e\u003cp\u003eThe receiver supports Dolby Atmos, Dolby TrueHD, DTS:X, DTS-HD Master Audio, and PCM 7.1 audio via the HDMI output.\u003c\/p\u003e\u003ch3\u003eWhat documentation is available for system submittals?\u003c\/h3\u003e\u003cp\u003eThe C2G31015 datasheet, installation manual, and HDBaseT comparison and selection guides are all available for technical review.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915733991702,"sku":"C2G31015","price":334.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/AVD-C2G-C2G31015-ProductImage1.jpg?v=1789975012"},{"product_id":"hdmi-hdbaset-vga-3-5mm-rs232-and-ir-over-cat-extender-dual-gang-wall-plate-transmitter-4k-60hz-c2g31017","title":"HDMI® HDBaseT + VGA , 3.5mm, RS232, and IR over Cat Extender Dual Gang Wall Plate Transmitter - 4K 60Hz","description":"\u003cp\u003eThe C2G31017 is an active HDBaseT transmitter designed to extend high-definition video and audio signals using a single Cat5e, Cat6, or Cat6a Ethernet cable. This dual-gang wall plate unit accepts both HDMI and VGA video inputs, making it a versatile solution for integrating legacy and modern sources in conference rooms, lecture halls, and classrooms. It supports 4K @ 30Hz and 4K @ 60Hz resolutions with 4:2:0 chroma subsampling and HDCP 2.2 compliance for secure connections. For extended reaches, it provides 115 feet for 4K HDMI over Cat5e\/Cat6 or up to 130 feet for 4K HDMI using Cat6a cabling. It also supports 1080p VGA extension up to 230 feet over Cat5e or Cat6. This transmitter manages audio via 3.5mm, RS232, and IR pass-through. It features PoC support to receive power from an HDBaseT receiver with a PSE module or via a local 12V AC adapter, which can then share power with the receiver through the 3-pin phoenix power out connector.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends 4K @ 60Hz HDMI and VGA signals over a single Cat5e, Cat6, or Cat6a cable\u003c\/li\u003e\n\u003cli\u003eSupports audio formats including Dolby Atmos, Dolby TrueHD, DTS:X, and PCM 5.1\/7.1\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant for secure content protection from HDMI sources\u003c\/li\u003e\n\u003cli\u003eSupports PoC to receive power from an HDBaseT receiver with PSE module\u003c\/li\u003e\n\u003cli\u003eFeatures RS232 and IR pass-through for advanced remote control integration\u003c\/li\u003e\n\u003cli\u003eDual-gang wall plate design accepts HDMI and VGA video inputs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat receivers is the C2G31017 compatible with?\u003c\/h3\u003e\u003cp\u003eThis transmitter is designed to work with C2G30016 and C2G31015 receivers.\u003c\/p\u003e\u003ch3\u003eHow far can I extend a 4K HDMI signal?\u003c\/h3\u003e\u003cp\u003eYou can extend 4K HDMI up to 115 feet using Cat5e or Cat6, or up to 130 feet when using Cat6a cabling.\u003c\/p\u003e\u003ch3\u003eCan this transmitter power the receiver?\u003c\/h3\u003e\u003cp\u003eYes, it supports PoC to receive power from a PSE-enabled HDBaseT receiver, or you can use a local 12V power supply and share it via the 3-pin phoenix power out.\u003c\/p\u003e\u003ch3\u003eDoes this unit support audio and control pass-through?\u003c\/h3\u003e\u003cp\u003eThe unit includes 3.5mm, RS232, and IR pass-through to allow remote control of equipment from the receiver end.\u003c\/p\u003e\u003ch3\u003eWhat video resolutions are supported?\u003c\/h3\u003e\u003cp\u003eThe C2G31017 supports video resolutions including 4K @ 60Hz, 4K @ 30Hz, 1080p @ 60Hz, and 1080p.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915735826710,"sku":"C2G31017","price":345.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/AVD-C2G-C2G31017-ProductImage1.jpg?v=1789975013"},{"product_id":"hdmi-hdbaset-usb-b-to-a-and-rs232-over-cat-extender-single-gang-wall-plate-transmitter-to-box-receiver-4k-60hz-taa-compliant-c2g31030","title":"HDMI® HDBaseT + USB-B to A and RS232 Over Cat Extender Single Gang Wall Plate Transmitter to Box Receiver - 4K 60Hz (TAA compliant)","description":"\u003cp\u003eThe C2G31030 is an HDBaseT transmitter and receiver kit designed to extend 4K HDMI video, USB 2.0 data, and RS232 control signals through a single network cable. This single-gang wall plate transmitter simplifies installations in conference rooms, classrooms, and lecture halls by consolidating multiple connections into one interface. Using Cat5e, Cat6, or Cat6a cabling, it delivers 4K @ 30Hz up to 130 feet or 4K @ 60Hz up to 115 feet. For 1080p resolution, the system reaches up to 230 feet over Cat5e or Cat6. \n\nThis kit supports high-speed USB 2.0 pass-through for devices like keyboards, mice, or cameras, with the receiver offering up to four USB-A female ports. Audio is fully supported, including PCM 2.0, 5.1, and 7.1, as well as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio. The transmitter utilizes Power over HDBaseT (PoH) to receive power directly from the receiver, eliminating the need for a separate local power adapter at the wall plate. It is HDCP 2.2 compliant and TAA compliant, ensuring secure and regulated use in professional environments.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends 4K @ 60Hz up to 115 ft (35 m) using Cat6a or 4K @ 30Hz up to 130 ft (40 m) using Cat6\u003c\/li\u003e\n\u003cli\u003eSupports USB 2.0 pass-through for up to 4 devices at distances up to 230 ft (70.1 m)\u003c\/li\u003e\n\u003cli\u003eSingle-cable solution for HDMI, USB, and RS232 over Cat5e, Cat6, or Cat6a\u003c\/li\u003e\n\u003cli\u003ePower over HDBaseT (PoH) allows the transmitter to be powered by the receiver\u003c\/li\u003e\n\u003cli\u003eSupports immersive audio formats including Dolby Atmos and DTS:X\u003c\/li\u003e\n\u003cli\u003eTAA compliant and HDCP 2.2 compliant for secure video playback\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eHow far can I extend 4K resolution with the C2G31030?\u003c\/h3\u003e\u003cp\u003eYou can extend 4K @ 60Hz up to 115 ft (35 m) with Cat6a, or 4K @ 30Hz up to 130 ft (40 m) using Cat6 cabling.\u003c\/p\u003e\u003ch3\u003eCan I use this to connect USB peripherals like cameras or keyboards?\u003c\/h3\u003e\u003cp\u003eYes, the receiver includes four USB-A female ports to support USB 2.0 devices for KVM control or webcams up to 230 ft (70.1 m) away.\u003c\/p\u003e\u003ch3\u003eDoes the transmitter require its own power supply?\u003c\/h3\u003e\u003cp\u003eNo, the transmitter uses Power over HDBaseT (PoH) to receive power directly from the receiver, simplifying your wall plate installation.\u003c\/p\u003e\u003ch3\u003eWhat kind of audio formats are supported through the extender?\u003c\/h3\u003e\u003cp\u003eThe system supports PCM 2.0, 5.1, and 7.1, as well as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio.\u003c\/p\u003e\u003ch3\u003eIs this unit TAA compliant for government contracts?\u003c\/h3\u003e\u003cp\u003eYes, the C2G31030 is TAA compliant and HDCP 2.2 compliant for secure signal transmission.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915740217622,"sku":"C2G31030","price":747.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/AVD-C2G-C2G31030-ProductImage1_c15281fc-f97b-4111-bea4-c111982f75e8.jpg?v=1789975015"},{"product_id":"hdmi-hdbaset-rs232-and-ir-over-cat-extender-single-gang-wall-plate-transmitter-to-ultra-slim-box-receiver-4k-60hz-c2g30025","title":"HDMI® HDBaseT + RS232 and IR over Cat Extender Single Gang Wall Plate Transmitter to Ultra-Slim Box Receiver - 4K 60Hz","description":"\u003cp\u003eThe C2G30025 HDMI HDBaseT + RS232 and IR over Cat Extender Single Gang Wall Plate Transmitter to Ultra-Slim Box Receiver is designed to overcome the distance limitations of standard HDMI cabling in professional environments. This kit utilizes a single Cat6a or Cat6 cable to extend 4K @ 60Hz video signals up to 130 feet. For installations utilizing Cat5e or Cat6, the system supports 4K HDMI up to 115 feet and 1080p up to 230 feet. The HDBaseT technology ensures high-bandwidth performance with a data transfer rate of 10.2 GBPS and HDCP 2.2 compliance for secure content protection. This solution is highly versatile for conference rooms, classrooms, and lecture halls where remote control and device management are required. It features bi-directional IR and RS232 pass-through for advanced control and supports sophisticated multi-channel audio formats including Dolby Atmos, Dolby TrueHD, DTS-X, and DTS-HD Master Audio. Additionally, the system features bi-directional PoC (Power over Cable) support, which allows a single power adapter to drive both the transmitter and the receiver, providing significant installation flexibility.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends 4K @ 60Hz HDMI via Cat6a up to 130 feet (40 m)\u003c\/li\u003e\n\u003cli\u003eSupports 4K @ 30Hz and 1080p up to 230 feet (70.1 m) using Cat5e or Cat6\u003c\/li\u003e\n\u003cli\u003eBi-directional IR and RS232 pass-through for remote device control\u003c\/li\u003e\n\u003cli\u003ePoC (Power over Cable) allows one power adapter to power both units\u003c\/li\u003e\n\u003cli\u003eSupports Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant for secure 4K content playback\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eHow far can I extend 4K video with the C2G30025?\u003c\/h3\u003e\u003cp\u003eYou can extend 4K @ 60Hz up to 130 feet using a Cat6a cable. If using Cat5e or Cat6, 4K signals reach up to 115 feet, while 1080p can be extended up to 230 feet.\u003c\/p\u003e\u003ch3\u003eWhat audio formats are supported by this extender?\u003c\/h3\u003e\u003cp\u003eThe C2G30025 supports multi-channel formats including Dolby Atmos, Dolby TrueHD, DTS:X, DTS-HD Master Audio, and PCM 2.0, 5.1, and 7.1.\u003c\/p\u003e\u003ch3\u003eDo I need to plug in both the transmitter and receiver?\u003c\/h3\u003e\u003cp\u003eNo, this kit supports bi-directional PoC (Power over Cable), meaning one power adapter can power both the transmitter and the receiver.\u003c\/p\u003e\u003ch3\u003eWill this kit work with my control system via RS232?\u003c\/h3\u003e\u003cp\u003eYes, the C2G30025 provides bi-directional RS232 and IR pass-through to allow for remote management and control of connected equipment.\u003c\/p\u003e\u003ch3\u003eWhich HDMI cables should I use for a reliable connection?\u003c\/h3\u003e\u003cp\u003eIt is recommended to use HDMI cables with gripping connectors to ensure greater port retention than standard HDMI connectors.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915833344278,"sku":"C2G30025","price":470.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/AVD-C2G-C2G30025-ProductImage1_6afdf323-190a-493e-8d8c-78c12176e27c.jpg?v=1789975048"},{"product_id":"dual-4k-hdmi-hdbaset-vga-3-5mm-and-rs232-over-cat-switching-extender-box-transmitter-to-ultra-slim-box-receiver-4k-60hz-c2g30027","title":"Dual 4K HDMI® HDBaseT + VGA, 3.5mm, and RS232 over Cat Switching Extender Box Transmitter to Ultra-Slim Box Receiver - 4K 60Hz","description":"\u003cp\u003eThe C2G30027 is a versatile AV extension solution designed to bridge the distance between high-resolution sources and displays in professional environments like lecture halls and conference rooms. This set includes a transmitter and an ultra-slim receiver that supports 4K @ 60Hz resolutions via HDMI or HDBaseT signals. For hybrid legacy setups, the transmitter accepts both HDMI and VGA video inputs, allowing for seamless integration of older equipment into modern 4K workflows. Audio is carried via 3.5mm analog inputs or embedded within the HDMI stream, supporting high-fidelity formats including Dolby Atmos, DTS:X, and PCM 7.1. The system features bi-directional IR and RS232 pass-through for remote device management and supports HDCP 2.2 for secure content playback. Utilizing bi-directional Power over Cable (PoC) technology, the units can be powered from either the transmitter or receiver side, significantly simplifying installation in tight spaces where only one power outlet is available.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSupports 4K @ 60Hz via HDMI or HDBaseT over Cat6a up to 130 ft (40 m)\u003c\/li\u003e\n\u003cli\u003eExtends 1080p resolution up to 230 ft (70.1 m) using Cat5e or Cat6 cabling\u003c\/li\u003e\n\u003cli\u003eTri-signal support for HDMI, VGA, and 3.5mm audio integration\u003c\/li\u003e\n\u003cli\u003eBi-directional IR and RS232 control for remote device management\u003c\/li\u003e\n\u003cli\u003eBi-directional PoC allows powering either unit via a single DC adapter\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant for secure high-definition content transmission\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat is the maximum distance for 4K @ 60Hz video?\u003c\/h3\u003e\u003cp\u003eYou can achieve 4K @ 60Hz up to 130 ft (40 m) when using a Cat6a cable, or 115 ft (35 m) with Cat6.\u003c\/p\u003e\u003ch3\u003eCan I use this to extend legacy VGA signals?\u003c\/h3\u003e\u003cp\u003eYes, the transmitter accepts VGA video inputs alongside HDMI, allowing you to extend VGA signals over the network cable.\u003c\/p\u003e\u003ch3\u003eDoes the C2G30027 require power at both the transmitter and receiver?\u003c\/h3\u003e\u003cp\u003eNo, this system supports bi-directional Power over Cable (PoC), so you only need one power adapter at either the transmitter or receiver end.\u003c\/p\u003e\u003ch3\u003eWhat type of audio formats are supported?\u003c\/h3\u003e\u003cp\u003eThe system supports advanced audio formats including Dolby Atmos, Dolby TrueHD, DTS:X, DTS-HD Master Audio, and PCM 7.1.\u003c\/p\u003e\u003ch3\u003eWhat cabling is recommended for the best performance?\u003c\/h3\u003e\u003cp\u003eFor maximum reliability, use HDBaseT Certified Cat6a patch cables, especially in high EMI\/RFI environments or when cables must be coiled.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915837047062,"sku":"C2G30027","price":376.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/AVD-C2G-C2G30027-ProductImage1.jpg?v=1789975050"},{"product_id":"hdmi-hdbaset-usb-b-to-a-rs232-over-cat-extender-box-tx-to-box-rx-18gbps-4k-60hz-up-to-328ft-c2g30055","title":"HDMI HDBaseT + USB-B to A + RS232 Over Cat Extender Box TX to Box RX (18Gbps) 4K 60Hz up to 328ft","description":"\u003cp\u003eThe C2G30055 HDMI HDBaseT + USB-B to A + RS232 Over Cat Extender Kit enables the transmission of uncompressed 4K 60Hz (4:4:4) video and audio alongside USB 2.0 and control signals using a single Cat6a cable. Reaching distances up to 328 ft (100 m), this unidirectional extender is a reliable solution for interactive whiteboards and displays located far from the source. The kit supports HDBT 3.0 and HDBT 2.0 technologies, ensuring compatibility with HDMI 2.0 specifications and HDCP 2.2. Audio formats supported include Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio, in addition to PCM 2.0, 5.1, and 7.1. The transmitter includes a USB-B female port and an HDMI female input, while the receiver features four USB-A female ports to connect peripherals, cameras, or storage devices. A built-in dip switch on the transmitter handles RS232 pass-through and facilitates field firmware updates. For simplified installation, the kit utilizes one-way Power over HDBaseT (PoH), meaning a single power adapter connected to the receiver provides power to both the transmitter and receiver.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends uncompressed 4K @ 60Hz (4:4:4) HDMI and USB 2.0 signals up to 328 ft (100 m) over a single Cat6a cable\u003c\/li\u003e\n\u003cli\u003eSupports high-fidelity audio formats including Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio\u003c\/li\u003e\n\u003cli\u003eFeatures RS232 pass-through and field firmware updating via integrated dip switch\u003c\/li\u003e\n\u003cli\u003eUtilizes one-way Power over HDBaseT (PoH) to power both TX and RX units from a single power adapter\u003c\/li\u003e\n\u003cli\u003eProvides 1GB Ethernet pass-through for network connectivity alongside AV and USB signals\u003c\/li\u003e\n\u003cli\u003eSupports USB 2.0 for connecting cameras, storage, and other peripherals to the source\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill the C2G30055 work with my 4K display?\u003c\/h3\u003e\u003cp\u003eYes, it supports uncompressed 4K @ 60Hz (4:4:4) HDMI signals and is compatible with displays supporting HDMI 2.0 and HDCP 2.2.\u003c\/p\u003e\u003ch3\u003eWhat cable type is required for this extender?\u003c\/h3\u003e\u003cp\u003eFor best performance and 328 ft (100 m) reaches, use HDBaseT Certified Cat6a Patch Cables. Shielded, solid conductor Cat6 or HDBaseT Certified Cat6a is recommended in high EMI\/RFI environments.\u003c\/p\u003e\u003ch3\u003eDoes this extender require power at both ends?\u003c\/h3\u003e\u003cp\u003eNo, this kit uses one-way Power over HDBaseT (PoH), allowing you to power both the transmitter and receiver from a single power adapter at the receiver.\u003c\/p\u003e\u003ch3\u003eCan I use USB devices with this extender?\u003c\/h3\u003e\u003cp\u003eYes, the receiver features four USB-A female ports that support streaming cameras, connected peripherals, and storage devices via USB 2.0.\u003c\/p\u003e\u003ch3\u003eWhat is the maximum distance for a 4K signal?\u003c\/h3\u003e\u003cp\u003eThe C2G30055 can extend 4K @ 60Hz signals up to 328 ft (100 m) using a single Cat6a Ethernet cable.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915856511254,"sku":"C2G30055","price":935.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/AVD-C2G-C2G30055-ProductImage1_3b6cacc0-9016-4746-be0e-5a239886409e.jpg?v=1789975058"},{"product_id":"infrared-ir-remote-control-repeater-kit-cg40430","title":"Infrared (IR) Remote Control Repeater Kit","description":"\u003cp\u003eThe CG40430 is an infrared (IR) remote control repeater kit designed to provide line-of-sight for equipment mounted in closets, entertainment centers, or behind wooden doors. This kit enables an installer to relocate the IR receiver to a central, visible location while the electronic components remain hidden. The system utilizes an IR repeater block that is 2.5in (L) x 2.25in (W) x 1in (H) and requires 12 VDC power, which is provided via the included AC\/DC adapter. The kit features a mini IR receiver with a 9ft (2.7 m) cable and four emitters to manage up to four devices, though the system is expandable to 12 components. To ensure reliable communication, both the receiver and the repeater include blinking blue LEDs that confirm when an IR signal has been successfully received.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends IR control to devices mounted in closets or behind closed wooden doors\u003c\/li\u003e\n\u003cli\u003eIncludes 4 emitters to control up to four separate devices\u003c\/li\u003e\n\u003cli\u003eFeatures blinking blue LEDs on the receiver and repeater to confirm IR signal reception\u003c\/li\u003e\n\u003cli\u003eSystem is expandable to control up to 12 components\u003c\/li\u003e\n\u003cli\u003eTAA Compliant and includes a required 12 VDC AC\/DC adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill this kit work with devices in a closed cabinet?\u003c\/h3\u003e\u003cp\u003eYes, the CG40430 allows you to mount the IR receiver in a visible location while the components remain inside a cabinet or closet.\u003c\/p\u003e\u003ch3\u003eHow many devices can I control with this repeater kit?\u003c\/h3\u003e\u003cp\u003eThe included kit provides 4 emitters to control four devices, but the system can be expanded to manage 12 components.\u003c\/p\u003e\u003ch3\u003eWhat is required to power the IR repeater block?\u003c\/h3\u003e\u003cp\u003eThe IR repeater block requires 12 VDC, and the necessary AC\/DC adapter is included in the kit.\u003c\/p\u003e\u003ch3\u003eAre replacement cables available for the IR receiver or emitters?\u003c\/h3\u003e\u003cp\u003eYes, you can order a 10ft Infrared Receiver with 3.5mm Plug (#98045), a 10ft Single IR Emitter Cable (#40432), or a 10ft Dual IR Emitter Cable (#40433).\u003c\/p\u003e\u003ch3\u003eWhich documents are available for installation and submittals?\u003c\/h3\u003e\u003cp\u003eYou can access the C2G-40430 Manual (PDF) or the product-specific Infrared (IR) Remote Control Repeater Kit (PDF) for technical details.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915963236630,"sku":"CG40430","price":133.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/C2G-40430-ProductImage-01.jpg?v=1789975195"},{"product_id":"10ft-3m-single-infrared-ir-emitter-cable-cg40432","title":"10ft (3m) Single Infrared (IR) Emitter Cable","description":"\u003cp\u003eThe C2G CG40432 is a 10ft (3.1 m) single IR emitter cable designed to extend remote control functionality to hidden components. When used with the #40430 Remote Control Repeater Kit, this cable allows you to place audio\/video equipment in cabinets, behind doors, or in separate rooms while maintaining full control. The emitter connects to a 2-conductor 3.5mm keystone jack and is applied directly over the IR eye of the target device using integrated adhesive backing. This emitter operates on 12 VDC and is compatible with most standard IR devices. This TAA compliant cable is a reliable solution for system integrators needing to relocate equipment without losing signal integrity.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned for use with the #40430 Remote Control Repeater Kit\u003c\/li\u003e\n\u003cli\u003eFeatures adhesive backing for easy attachment to device IR eyes\u003c\/li\u003e\n\u003cli\u003eSupports IR communication for remote control of hidden equipment\u003c\/li\u003e\n\u003cli\u003eOperates on 12 VDC and maintains compatibility with most IR devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat do I need to use the CG40432 IR emitter?\u003c\/h3\u003e\u003cp\u003eThis cable is designed for use with the #40430 Remote Control Repeater Kit to extend control signals.\u003c\/p\u003e\u003ch3\u003eHow is the emitter attached to my equipment?\u003c\/h3\u003e\u003cp\u003eThe emitter features an adhesive backing that allows it to be stuck directly over the IR eye of your audio\/video device.\u003c\/p\u003e\u003ch3\u003eCan I control devices located in different rooms?\u003c\/h3\u003e\u003cp\u003eYes, this emitter allows you to control audio\/video devices even if they are located behind doors or in other rooms.\u003c\/p\u003e\u003ch3\u003eIs this product TAA compliant?\u003c\/h3\u003e\u003cp\u003eYes, the CG40432 is TAA compliant and meets NDAA 889 requirements.\u003c\/p\u003e\u003ch3\u003eWhat are the connector types for this cable?\u003c\/h3\u003e\u003cp\u003eThis cable features two 3.5mm male connectors.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915965661462,"sku":"CG40432","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/C2G-40432-ProductImage-01.jpg?v=1789975196"},{"product_id":"10ft-3m-dual-infrared-ir-emitter-cable-cg40433","title":"10ft (3m) Dual Infrared (IR) Emitter Cable","description":"\u003cp\u003eThe C2G CG40433 is a 10ft (3.1 m) Dual Infrared (IR) Emitter Cable designed specifically for use with the #40430 Remote Control Repeater Kit. This cable enables installers to hide audio\/video components in cabinets, behind doors, or in separate rooms by passing IR communication signals to the actual hardware. Each emitter is designed to be positioned directly over the IR eye of the target device using an adhesive backing. These emitters operate on 12 VDC and are compatible with most IR-controlled devices. This TAA compliant cable is an essential component for system integrators needing to maintain line-of-sight control for equipment that is not visible to the user.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned for use with the #40430 Remote Control Repeater Kit\u003c\/li\u003e\n\u003cli\u003eDual emitters with adhesive backing for attachment to device IR eyes\u003c\/li\u003e\n\u003cli\u003ePasses IR communication signals for remote device control\u003c\/li\u003e\n\u003cli\u003eTAA compliant and NDAA 889 compliant\u003c\/li\u003e\n\u003cli\u003e10 ft (3.1 m) cable length for flexible component placement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat do I need to use the CG40433 cable?\u003c\/h3\u003e\u003cp\u003eThis cable is intended for use with the #40430 Remote Control Repeater Kit to facilitate remote control functionality.\u003c\/p\u003e\u003ch3\u003eHow do I install the emitters on my equipment?\u003c\/h3\u003e\u003cp\u003eThe emitters feature an adhesive backing, allowing you to stick them directly over the IR eye of your audio\/video equipment.\u003c\/p\u003e\u003ch3\u003eCan this cable be used to control devices in a different room?\u003c\/h3\u003e\u003cp\u003eYes, the CG40433 allows you to control audio\/video devices even when they are located behind doors or in other rooms.\u003c\/p\u003e\u003ch3\u003eIs the CG40433 TAA compliant?\u003c\/h3\u003e\u003cp\u003eYes, the CG40433 is TAA compliant and meets NDAA 889 requirements.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915967856918,"sku":"CG40433","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/C2G-40433-ProductImage-01_f6a24dec-6d4f-4bed-b267-be50e110d8a2.jpg?v=1789975196"},{"product_id":"hdmi-inline-extender-4k-60hz-cg42394","title":"HDMI® Inline Extender - 4K 60Hz","description":"\u003cp\u003eThe CG42394 is a C2G HDMI Inline Extender designed to extend A\/V signals over existing HDMI cabling. This active device supports high-resolution video, including 4K @ 60Hz (4096 x 2160) with 4:4:4 chroma subsampling for a total bandwidth of 18 Gbps. When utilizing 4K resolution, the extender reaches distances up to 82ft, while standard 1080p signals can be extended up to 164ft. This unit is HDCP 2.2 compliant and supports HDR10, Dolby Vision HDR, 3D formats, and CEC pass-through. It also handles advanced audio formats such as Dolby TrueHD, DTS-HD Master Audio, Dolby Digital AC3, and LPCM 7.1. The female-to-female configuration allows for simple installation between a source and a display. While many HDMI sources provide enough power for operation, some devices may require an external DC to USB power cable or an HDMI Voltage Inserter (C2G 42223 or 42236) to function properly.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends 4K (4096 x 2160 @ 60Hz, 4:4:4) up to 82ft\u003c\/li\u003e\n\u003cli\u003eExtends 1080p resolution up to 164ft\u003c\/li\u003e\n\u003cli\u003eSupports 18 Gbps bandwidth, HDR10, and Dolby Vision HDR\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 compliant with CEC pass-through and 3D format support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eHow far can I extend 4K resolution with the CG42394?\u003c\/h3\u003e\u003cp\u003eThe CG42394 supports 4K @ 60Hz (4:4:4) up to distances of 82ft. For 1080p resolutions, the maximum extension distance is 164ft.\u003c\/p\u003e\u003ch3\u003eWhat if my HDMI source device does not provide enough power?\u003c\/h3\u003e\u003cp\u003eIf a source device cannot output sufficient power for the extender, you can use the included DC to USB power cable or an HDMI Voltage Inserter like the C2G 42223 or 42236.\u003c\/p\u003e\u003ch3\u003eDoes this extender support HDR and high-end audio formats?\u003c\/h3\u003e\u003cp\u003eYes, the CG42394 supports HDR10 and Dolby Vision HDR, as well as audio formats including Dolby TrueHD, DTS-HD Master Audio, and LPCM 7.1.\u003c\/p\u003e\u003ch3\u003eWhat is the maximum bandwidth supported by the CG42394?\u003c\/h3\u003e\u003cp\u003eThis active extender supports a total data transfer rate of up to 18 Gbps, enabling high-bandwidth HDMI 2.0 performance.\u003c\/p\u003e\u003ch3\u003eWhat do I need to complete the installation of this extender?\u003c\/h3\u003e\u003cp\u003eYou will need two HDMI cables: one from your source to the 'Source' port and one from the 'Display' port to your monitor or projector. Note that this is an active device that uses the HDMI cable for power.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51915999314198,"sku":"CG42394","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/C2G-42394-ProductImage-01_88720f4f-dd10-4df8-83de-b967c4eac736.jpg?v=1789975207"},{"product_id":"hdmi-over-cat5-6-extender-up-to-164ft-50m-cg60180","title":"HDMI Over Cat5\/6 Extender up to 164ft (50m)","description":"\u003cp\u003eThe C2G CG60180 is an active HDMI over Cat5\/6 extender designed to transmit digital video and audio signals over long distances. It is a plug-and-play solution for environments like churches, schools, and trade shows where the HDMI source is located more than 50 feet from the display. This extender utilizes a single Cat5 or Cat6 patch cable to bridge the distance, providing a cost-effective alternative to running long, heavy HDMI cables. The device supports video resolutions up to 1080p at 60Hz and is capable of transmitting 3D content. With a data transfer rate of 6.75 Gbps, it maintains high-performance signal quality for digital signage and presentation applications. The system is designed for easy setup: connect the transmitter to your video source, the receiver to your display, and use a single category cable to complete the link.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends HDMI video and audio up to 164 ft (50 m) using a single Cat5 or Cat6 cable\u003c\/li\u003e\n\u003cli\u003eSupports video resolutions up to 1080p at 60Hz and 3D content\u003c\/li\u003e\n\u003cli\u003eHigh-speed performance with a 6.75 GBPS HDMI transfer rate\u003c\/li\u003e\n\u003cli\u003ePlug and play operation with no drivers or software installation required\u003c\/li\u003e\n\u003cli\u003eIncludes an international power supply and gold-plated HDMI contacts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat is the maximum distance the CG60180 can extend HDMI signals?\u003c\/h3\u003e\u003cp\u003eThis extender supports distances up to 164 ft (50 m) using a single Cat5 or Cat6 cable.\u003c\/p\u003e\u003ch3\u003eWhat video resolutions and formats are supported by the CG60180?\u003c\/h3\u003e\u003cp\u003eThe device supports video resolutions up to 1080p at 60Hz and is capable of transmitting 3D signals.\u003c\/p\u003e\u003ch3\u003eWhat type of cabling is required for the connection between the units?\u003c\/h3\u003e\u003cp\u003eA single Cat5 or Cat6 patch cable is required to connect the transmitter and the receiver.\u003c\/p\u003e\u003ch3\u003eDo I need to install any drivers to use this HDMI extender?\u003c\/h3\u003e\u003cp\u003eNo, the CG60180 is a plug and play device that requires no software or drivers to operate.\u003c\/p\u003e\u003ch3\u003eWhat is the required data transfer rate for this extender?\u003c\/h3\u003e\u003cp\u003eThe unit supports an HDMI transfer rate of 6.75 GBPS.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51916010488086,"sku":"CG60180","price":198.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/C2G-60180-ProductImage-01_d179d264-45a4-4b19-83d2-8b1026469cdf.jpg?v=1789975207"},{"product_id":"hdmi-over-ip-encoder-4k-30hz-cg29975","title":"HDMI® over IP Encoder - 4K 30Hz","description":"\u003cp\u003eThe CG29975 is a C2G HDMI over IP Encoder designed to transmit HDMI audio and video signals across a local network or the Internet. It accepts an HDMI input with a maximum resolution of 4K @ 30Hz and streams the content using H.264 or H.265 video codecs. This encoder is compatible with the HDMI over IP Decoder (29976) and can scale to support audio\/video matrix switching across more than 600 devices. For distributed installations such as digital signage, video walls, or corporate environments, this device provides high image quality with 200ms latency when using H.265 in low latency mode. Connectivity includes one HDMI female input, one RJ-45 female port, one USB Mini-B female, one DB9 female, and two 3.5mm female ports for stereo audio and directional IR. This unit is TAA compliant and is intended to be powered via a PoE (PSE) Ethernet Switch, as an external power supply is not included.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSupports HDMI input video resolution up to 4K @ 30Hz\u003c\/li\u003e\n\u003cli\u003eUtilizes H.264\/H.265 video codecs for efficient LAN and Internet transmission\u003c\/li\u003e\n\u003cli\u003eProvides high image quality with 200ms latency in low latency mode using H.265\u003c\/li\u003e\n\u003cli\u003eSupports Multicast, RTSP, RTMP, HLS, FLV, and TS streaming formats\u003c\/li\u003e\n\u003cli\u003eFeatures 2CH audio embedding, stereo audio, and directional IR inputs\u003c\/li\u003e\n\u003cli\u003eIncludes a Serial RS232 control port for integrated system management\u003c\/li\u003e\n\u003cli\u003ePoE (PD) powered via a PoE (PSE) Ethernet Switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat resolution does the CG29975 support?\u003c\/h3\u003e\u003cp\u003eThe encoder accepts a maximum HDMI input resolution of 4K @ 30Hz.\u003c\/p\u003e\u003ch3\u003eDoes this encoder require an external power supply?\u003c\/h3\u003e\u003cp\u003eNo, this device supports PoE (PD) and is intended to be powered via a PoE (PSE) Ethernet Switch.\u003c\/p\u003e\u003ch3\u003eWhat video codecs are used for streaming?\u003c\/h3\u003e\u003cp\u003eThe device uses H.264\/H.265 video codecs to stream content to compatible decoders.\u003c\/p\u003e\u003ch3\u003eCan I use this for large scale video wall installations?\u003c\/h3\u003e\u003cp\u003eYes, this encoder can support scalable audio\/video matrix switching to over 600 devices.\u003c\/p\u003e\u003ch3\u003eWhat cable type is required for installation?\u003c\/h3\u003e\u003cp\u003eThe device uses Cat6 or Cat6a cable; in electrically noisy environments, an STP cable must be used.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51916036571414,"sku":"CG29975","price":1535.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/C2G-29975-ProductImage-01_6beb710f-250d-45df-b737-943f238c215f.jpg?v=1789975223"},{"product_id":"wall-mount-bracket-kit-for-hdmi-over-ip-extenders-cg29983","title":"Wall Mount Bracket Kit for HDMI® over IP Extenders","description":"\u003cp\u003eThe C2G CG29983 is a Wall Mount Bracket Kit designed specifically for securing HDMI over IP Extenders to a wall surface. This kit provides a clean, professional installation for your extender hardware. The package includes two (2) mounting brackets and four (4) M2 screws to complete the installation. Each individual bracket features a black painted metal enclosure with physical dimensions of 2.13\" x 0.79\" x 0.5\" (54mm x 20mm x 13mm). This kit is TAA compliant and meets several regulatory standards, including NDAA 889, RoHS, REACH, and TSCA. The hardware is intended to provide a stable, fixed mounting solution for C2G HDMI over IP Extender units in residential or commercial AV deployments.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSpecifically designed to mount HDMI over IP Extenders to a wall\u003c\/li\u003e\n\u003cli\u003eKit includes two (2) mounting brackets and four (4) M2 screws\u003c\/li\u003e\n\u003cli\u003eEnclosure is constructed from black painted metal\u003c\/li\u003e\n\u003cli\u003eTAA compliant and NDAA 889 compliant hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat is included in the CG29983 mounting kit?\u003c\/h3\u003e\u003cp\u003eThe kit contains two (2) mounting brackets and four (4) M2 screws required to secure the hardware.\u003c\/p\u003e\u003ch3\u003eIs the CG29983 TAA compliant for government projects?\u003c\/h3\u003e\u003cp\u003eYes, this mounting kit is TAA compliant and meets NDAA 889 standards.\u003c\/p\u003e\u003ch3\u003eWhat are the dimensions of the individual brackets?\u003c\/h3\u003e\u003cp\u003eEach bracket measures 2.13\" x 0.79\" x 0.5\" (54mm x 20mm x 13mm).\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"C2G","offers":[{"title":"Default Title","offer_id":51916040569110,"sku":"CG29983","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/C2G-29983-ProductImage-01_1a9645fd-3100-4706-bafb-141f21120a23.jpg?v=1789975225"}],"url":"https:\/\/avsupplies.us\/collections\/cables-av-extension.oembed","provider":"AV Supplies","version":"1.0","type":"link"}