{"title":"Luxul","description":"\u003cp\u003eManaged switches, access points, routers. AVSupplies.us is an Authorized Premium Dealer of Legrand AV Products.\u003c\/p\u003e","products":[{"product_id":"direct-attach-cable-0-5m-10gb-copper-passive-10g-cab-05","title":"Direct-Attach Cable 0.5m 10GB Copper Passive","description":"\u003cp\u003eThe 10G-CAB-05 provides a cost-effective solution for short-run connections between Luxul managed AV switches that feature 10 Gigabit stacking ports. This 0.5m copper cable features integrated modules and is ready for immediate use, eliminating the need for separate fiber-based SFP+ modules or manual termination. It is a hot-pluggable solution designed to facilitate the stacking of two switches. For larger network configurations, multiple 10G-CAB-05 cables can be utilized to stack up to 16 Luxul AV switches in a single stack. This direct-attach method ensures high-speed, bi-directional 10 Gigabit performance for integrated rack environments.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.5m length for short-run switch stacking\u003c\/li\u003e\n\u003cli\u003eProvides 10 Gigabit bi-directional performance\u003c\/li\u003e\n\u003cli\u003eIncludes integrated modules for plug-and-play installation\u003c\/li\u003e\n\u003cli\u003eHot-pluggable design allows for immediate deployment\u003c\/li\u003e\n\u003cli\u003eSupports stacking up to 16 Luxul AV switches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eDo I need to buy separate SFP modules for the 10G-CAB-05?\u003c\/h3\u003e\u003cp\u003eNo, the 10G-CAB-05 features integrated modules and the cable is ready for immediate use without additional hardware.\u003c\/p\u003e\u003ch3\u003eCan I use the 10G-CAB-05 to stack more than two switches?\u003c\/h3\u003e\u003cp\u003eYes, while one cable connects two switches, you can use multiple 10G-CAB-05 units to stack up to 16 Luxul AV switches.\u003c\/p\u003e\u003ch3\u003eWhat switches is this cable compatible with?\u003c\/h3\u003e\u003cp\u003eThis cable is designed specifically for use with Luxul managed AV switches that are equipped with 10 Gigabit stacking ports.\u003c\/p\u003e\u003ch3\u003eWhat is the performance rating of this direct-attach cable?\u003c\/h3\u003e\u003cp\u003eThe 10G-CAB-05 supports 10 Gigabit bi-directional performance for high-speed data transfer between devices.\u003c\/p\u003e\u003ch3\u003eIs the 10G-CAB-05 TAA compliant?\u003c\/h3\u003e\u003cp\u003eThe 10G-CAB-05 is not listed as TAA compliant in its current manufacturer specifications.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909235441942,"sku":"10G-CAB-05","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/10GCAB05_main.jpg?v=1789975897"},{"product_id":"10gb-multimode-fiber-duplex-sfp-module-850nm-vcsel-300m-over-om3-fiber-10g-mm-dx-lc","title":"10GB Multimode Fiber Duplex SFP+ Module 850nm VCSEL 300M Over OM3 Fiber","description":"\u003cp\u003eThe 10G-MM-DX-LC is a 10 Gigabit SFP+ module designed for use in Luxul Ethernet AV switches equipped with SFP+ ports. This multimode Mini GBIC module operates at an 850nm wavelength and utilizes a Duplex LC connector to facilitate high-speed data transfer. It is specifically intended for connecting Luxul managed AV switches that require 10 Gigabit uplink or stacking capabilities. When deployed with OM3 multimode fiber, this hot-pluggable module provides 10 Gigabit connectivity across distances of up to 300 meters. This module complies with IEEE 802.3z standards for reliable bi-directional performance in professional AV networking environments.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e10 Gigabit bi-directional performance for high-speed uplinks\u003c\/li\u003e\n\u003cli\u003eSupports distances up to 300 meters using OM3 multimode fiber\u003c\/li\u003e\n\u003cli\u003e850nm wavelength with a Duplex LC connector\u003c\/li\u003e\n\u003cli\u003eHot-pluggable design for seamless installation and maintenance\u003c\/li\u003e\n\u003cli\u003eCompliant with IEEE 802.3z standards\u003c\/li\u003e\n\u003cli\u003eTAA compliant for government and enterprise procurement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat fiber optic cable is required for the 10G-MM-DX-LC?\u003c\/h3\u003e\u003cp\u003eThis module requires OM3 multimode fiber to achieve a maximum transmission distance of 300 meters.\u003c\/p\u003e\u003ch3\u003eCan I use this module for switch stacking?\u003c\/h3\u003e\u003cp\u003eYes, it is specifically provided for connecting Luxul managed AV switches that utilize 10 Gigabit uplink or stacking ports.\u003c\/p\u003e\u003ch3\u003eIs this SFP+ module hot-swappable?\u003c\/h3\u003e\u003cp\u003eYes, the 10G-MM-DX-LC is a hot-pluggable module, allowing it to be inserted or removed without powering down the switch.\u003c\/p\u003e\u003ch3\u003eWhat is the connector type for this module?\u003c\/h3\u003e\u003cp\u003eThe 10G-MM-DX-LC features a Duplex LC connector.\u003c\/p\u003e\u003ch3\u003eIs the 10G-MM-DX-LC TAA compliant?\u003c\/h3\u003e\u003cp\u003eYes, this module is TAA compliant and meets IEEE 802.3z standards.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909235704086,"sku":"10G-MM-DX-LC","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/10GMMDXLC_main.jpg?v=1789975898"},{"product_id":"1gb-multimode-fiber-duplex-sfp-module-850nm-vcsel-550m-over-om2-fiber-1g-mm-dx-lc","title":"1GB Multimode Fiber Duplex SFP Module 850nm VCSEL 550M Over OM2 Fiber","description":"\u003cp\u003eThe 1G-MM-DX-LC is a 1 Gigabit SFP module designed for use within Luxul Ethernet AV switches equipped with an available SFP port. This hot-pluggable mini GBIC module operates at an 850nm wavelength in Duplex (DX) mode to facilitate high-speed connectivity. It utilizes a Duplex LC connector to interface with fiber optic cabling, supporting maximum transmission distances of up to 550 meters when deployed over OM2 Multimode fiber. For varied installation requirements, this module is also compatible with both OM1 and OM3 fiber types. Built to IEEE 802.3z standards, this TAA compliant module ensures reliable bi-directional performance for professional AV networking environments.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 Gigabit bi-directional performance\u003c\/li\u003e\n\u003cli\u003e850nm VCSEL operation with Duplex LC connector\u003c\/li\u003e\n\u003cli\u003eSupports transmission up to 550 meters over OM2 fiber\u003c\/li\u003e\n\u003cli\u003eCompatible with OM1, OM2, and OM3 multimode fiber\u003c\/li\u003e\n\u003cli\u003eHot-pluggable for easy installation into Luxul AV switches\u003c\/li\u003e\n\u003cli\u003eCompliant with IEEE 802.3z standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat fiber types are compatible with the 1G-MM-DX-LC?\u003c\/h3\u003e\u003cp\u003eThis module is compatible with OM1, OM2, and OM3 multimode fiber optic cables.\u003c\/p\u003e\u003ch3\u003eHow far can I run a connection with this SFP module?\u003c\/h3\u003e\u003cp\u003eYou can achieve a maximum transmission distance of 550 meters when using OM2 Multimode fiber.\u003c\/p\u003e\u003ch3\u003eCan I install this module while the switch is powered on?\u003c\/h3\u003e\u003cp\u003eYes, the 1G-MM-DX-LC is a hot-pluggable module designed for easy installation into SFP slots.\u003c\/p\u003e\u003ch3\u003eWhat kind of connector does this SFP module use?\u003c\/h3\u003e\u003cp\u003eThe module features a Duplex LC connector for its fiber interface.\u003c\/p\u003e\u003ch3\u003eIs this SFP module TAA compliant for government projects?\u003c\/h3\u003e\u003cp\u003eYes, this module is TAA compliant and meets IEEE 802.3z standards.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909235900694,"sku":"1G-MM-DX-LC","price":155.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/1GMMDXLC_main.jpg?v=1789975898"},{"product_id":"single-port-2-5-gigabit-poe-poe-injector-30w-with-us-power-cord-pi-25","title":"Single Port 2.5 Gigabit PoE\/PoE+ Injector 30W with US Power Cord","description":"\u003cp\u003eThe Luxul PI-25 is a single port PoE+ (Power Over Ethernet) injector designed to deliver both data and electrical power to PoE enabled devices through standard Ethernet cabling. By utilizing the power provided by this injector, installers can place devices like wireless access points in locations far from traditional power outlets, which increases installation flexibility and reduces labor costs. This injector is IEEE 802.3at compliant and supports 2.5 Gigabit speeds (10\/100\/1000). It features a built-in power supply and includes a US power cord for immediate setup. When using standard Ethernet cable, PoE enabled devices can be located up to 328 feet (100 meters) away from the PI-25 injector.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSupports 2.5 Gigabit speeds (10\/100\/1000 Mbps)\u003c\/li\u003e\n\u003cli\u003eIEEE 802.3at compliant, delivering up to 30 Watts of power\u003c\/li\u003e\n\u003cli\u003eSingle port injector with built-in power supply\u003c\/li\u003e\n\u003cli\u003eCompatible with devices such as the Luxul AP-3064 Wi-Fi 6 AX3600 4x4 Multi-Gig Access Point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eHow far can I run the cable to my PoE device?\u003c\/h3\u003e\u003cp\u003ePoE enabled devices can be placed up to 328 feet (100 meters) away from the PI-25 injector using standard Ethernet cable.\u003c\/p\u003e\u003ch3\u003eWhat is the maximum power output of the PI-25?\u003c\/h3\u003e\u003cp\u003eThe PI-25 is an IEEE 802.3at compliant injector that delivers up to 30 Watts of power.\u003c\/p\u003e\u003ch3\u003eIs the US power cord included with this injector?\u003c\/h3\u003e\u003cp\u003eYes, this PI-25 kit includes a US power cord for the integrated power supply.\u003c\/p\u003e\u003ch3\u003eWhat other hardware do I need for installation?\u003c\/h3\u003e\u003cp\u003eYou will need your own Ethernet cable to connect the injector to your device.\u003c\/p\u003e\u003ch3\u003eCan I use this with a Luxul AP-3064?\u003c\/h3\u003e\u003cp\u003eThe PI-25 is listed as compatible with the Luxul AP-3064 Wi-Fi 6 AX3600 4x4 Multi-Gig Access Point (US).\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909236064534,"sku":"PI-25","price":73.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/PI-25_1_762dffd2-e3c0-4a46-aa89-1a155881a1fb.jpg?v=1789975903"},{"product_id":"epic-4-multi-wan-gigabit-router-with-us-power-cord-abr-4500","title":"Epic 4 - Multi-WAN Gigabit Router with US Power Cord","description":"\u003cp\u003eThe Luxul ABR-4500 is a high-performance Epic 4 series router designed to deliver robust networking for bandwidth-intensive applications and streaming. This wired router supports gigabit speeds for both WAN-to-LAN and LAN-to-LAN connections, ensuring fast data rates across your local network. With multi-WAN capability, the ABR-4500 allows you to connect your LAN to multiple internet connections, providing essential load-balancing and failover control to maintain uptime. \n\nSecurity and management are central to the ABR-4500, which includes secure remote access via VPN and powerful web content filtering. For environments requiring parental controls, this router supports Bark Technologies service (available with firmware version 7.0.0 or later) to manage and schedule network usage. The unit features a clean design with green\/blue front-facing LEDs and rear-facing ports for organized AV rack integration. This router is built for professional installations, offering 802.1Q VLAN compliance and support for up to 8 SSIDs to segment network traffic effectively.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMulti-WAN capability for load-balancing and connection failover\u003c\/li\u003e\n\u003cli\u003eGigabit wired networking with 1Gbps LAN-LAN and WAN-LAN rates\u003c\/li\u003e\n\u003cli\u003eSecure VPN for reliable remote access to the network\u003c\/li\u003e\n\u003cli\u003eCustomizable web content filtering and usage scheduling\u003c\/li\u003e\n\u003cli\u003e802.1Q VLAN compliance for advanced network segmentation\u003c\/li\u003e\n\u003cli\u003eFront-facing LEDs and rear-facing ports for rack-ready installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill the ABR-4500 support failover for my internet connection?\u003c\/h3\u003e\u003cp\u003eYes, the ABR-4500 features multi-WAN capability that allows you to connect the LAN to multiple internet connections for load-balancing and failover control.\u003c\/p\u003e\u003ch3\u003eCan I use the ABR-4500 for remote access to my network?\u003c\/h3\u003e\u003cp\u003eYes, this router includes secure remote access capabilities via VPN, allowing you to connect to the network from a remote location.\u003c\/p\u003e\u003ch3\u003eWhat are the data speeds of the ABR-4500 wired ports?\u003c\/h3\u003e\u003cp\u003eThe ABR-4500 provides 1Gbps wired data rates for both WAN-to-LAN and LAN-to-LAN connections.\u003c\/p\u003e\u003ch3\u003eDoes this router support VLANs?\u003c\/h3\u003e\u003cp\u003eThe ABR-4500 is compliant with 802.1Q VLAN standards, supporting advanced network segmentation.\u003c\/p\u003e\u003ch3\u003eHow do I set up Bark parental controls on this router?\u003c\/h3\u003e\u003cp\u003eTo use Bark parental controls on the ABR-4500, you must be running firmware version 7.0.0 or later.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909236261142,"sku":"ABR-4500","price":415.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/abr-4500a.jpg?v=1789975899"},{"product_id":"4-port-unmanaged-poe-switch-sw-100-04p","title":"4 Port Unmanaged PoE+ Switch","description":"\u003cp\u003eThe Luxul SW-100-04P is a compact unmanaged Gigabit PoE+ switch designed to expand network capacity for PoE-enabled devices. This switch provides four PoE+ capable ports, offering a total PoE power budget of 58W, which is suitable for powering devices such as IP cameras, wireless access points, control panels, and AV over IP equipment. A single dedicated uplink port is included, ensuring the four primary ports remain available for providing both network connectivity and power to end devices. This unit features a durable, compact metal housing that is designed for silent, fanless operation, making it suitable for placement in noise-sensitive environments. For installation versatility, the chassis includes rubber feet for surface mounting and built-in keyhole features for securing the device to a wall. This plug-and-play switch provides a 10 Gbps switching capacity to maintain efficient data throughput across the local network.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProvides four Gigabit PoE+ ports with a 58W total PoE power budget\u003c\/li\u003e\n\u003cli\u003eIncludes one dedicated uplink port to keep all four PoE ports available for devices\u003c\/li\u003e\n\u003cli\u003eFanless design ensures silent operation in any environment\u003c\/li\u003e\n\u003cli\u003eDurable metal case with rubber feet and keyhole mounting options\u003c\/li\u003e\n\u003cli\u003eOffers 10 Gbps switching capacity for high-speed data handling\u003c\/li\u003e\n\u003cli\u003ePlug-and-play unmanaged configuration for rapid deployment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat is the total PoE power budget for the Luxul SW-100-04P?\u003c\/h3\u003e\u003cp\u003eThe SW-100-04P provides a total PoE power budget of 58W across its four PoE+ capable ports.\u003c\/p\u003e\u003ch3\u003eCan I use the SW-100-04P for IP cameras and wireless access points?\u003c\/h3\u003e\u003cp\u003eYes, the SW-100-04P is designed to provide power and connectivity to PoE-enabled devices like IP cameras and wireless access points.\u003c\/p\u003e\u003ch3\u003eDoes the SW-100-04P require an uplink port?\u003c\/h3\u003e\u003cp\u003eYes, this model includes one dedicated uplink port, leaving all four primary ports available for your PoE-enabled hardware.\u003c\/p\u003e\u003ch3\u003eHow is this switch mounted in the field?\u003c\/h3\u003e\u003cp\u003eThe metal enclosure features rubber feet for surface mounting and integrated keyhole features for wall mounting.\u003c\/p\u003e\u003ch3\u003eIs this a noisy switch for quiet rooms?\u003c\/h3\u003e\u003cp\u003eThe SW-100-04P operates with a fanless design, ensuring silent operation for noise-sensitive installations.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909236490518,"sku":"SW-100-04P","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/SW-100-04P_main.jpg?v=1789975904"},{"product_id":"5-port-unmanaged-poe-switch-with-poe-passthrough-sw-100-05pd","title":"5 Port Unmanaged PoE+ Switch With POE Passthrough","description":"\u003cp\u003eThe Luxul SW-100-05PD is a compact 5-port unmanaged PoE+ powered switch designed to extend network access in locations where power outlets are unavailable. This switch is powered via a PoE+ uplink, utilizing a 30W PoE+ input to drive its internal operations. It features one dedicated uplink port for power input, leaving four available ports for network connectivity. One of these four ports provides PoE output (limited to a 15W maximum on port 4) to support a single PoE 802.3af device, such as a camera, AV over IP receiver, or control system interface. \n\nConstructed in a durable metal enclosure, the SW-100-05PD is built for various installation environments. It includes detachable wing brackets for wall mounting, keyholes for standard mounting, and attachable magnet feet for securing the unit to metal surfaces or a desktop. Because it is fanless, it operates completely silently, making it suitable for noise-sensitive areas. This plug-and-play device simplifies deployment by providing immediate Gigabit Ethernet connectivity without requiring complex configuration.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtends network connectivity to 4 devices using a single PoE+ uplink (30W input)\u003c\/li\u003e\n\u003cli\u003eProvides PoE output on port 4 to power one 802.3af device (up to 15W)\u003c\/li\u003e\n\u003cli\u003eSilent, fanless operation for use in noise-sensitive environments\u003c\/li\u003e\n\u003cli\u003eVersatile mounting with detachable wing brackets, magnet feet, and keyholes\u003c\/li\u003e\n\u003cli\u003eCompact metal housing designed for desktop, wall, or metal rack mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eHow is the SW-100-05PD powered?\u003c\/h3\u003e\u003cp\u003eThe switch is powered through its dedicated uplink port via a 30W PoE+ input, eliminating the need for a local AC outlet.\u003c\/p\u003e\u003ch3\u003eCan I power a camera through this switch?\u003c\/h3\u003e\u003cp\u003eYes, port 4 provides a PoE output with a 15W maximum power budget to support a single 802.3af-compliant device like a camera.\u003c\/p\u003e\u003ch3\u003eWhat mounting options are available for the SW-100-05PD?\u003c\/h3\u003e\u003cp\u003eThe unit includes detachable wing brackets for wall mounting, keyholes, and magnetic feet for installation on metal surfaces.\u003c\/p\u003e\u003ch3\u003eDoes the SW-100-05PD require configuration?\u003c\/h3\u003e\u003cp\u003eNo, this is an unmanaged, plug-and-play switch that provides immediate Gigabit Ethernet connectivity upon connection.\u003c\/p\u003e\u003ch3\u003eHow many total ports are available for network devices?\u003c\/h3\u003e\u003cp\u003eAfter using one port for the PoE+ power uplink, you have four remaining ports available for network connectivity.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909236687126,"sku":"SW-100-05PD","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/SW-100-05PD_main.jpg?v=1789975905"},{"product_id":"wireless-controller-32-access-point-support-with-us-power-cord-xwc-2000","title":"Wireless Controller - 32 Access Point Support with US Power Cord","description":"\u003cp\u003eThe Luxul XWC-2000 is a centralized wireless controller designed to manage up to 32 Luxul Access Points within a single network. By utilizing Luxul’s proprietary Roam Assist™ technology, this controller facilitates active client roaming between multiple access points, ensuring mobile devices maintain stable connections as they move throughout a wireless AV network. This centralized management simplifies deployment through an intuitive setup wizard, allowing installers to configure complex wireless environments efficiently. This unit features a durable 1U metal enclosure suitable for standard rack mounting or desktop placement. The XWC-2000 is compatible with various Luxul AP models, including the XAP-1610, XAP-1510, XAP-810, XAP-1240, and XAP-1440, providing installers the flexibility to mix and match access points to meet specific project requirements and performance goals. It includes a US power cord and requires one 10\/100\/1000 Ethernet connection for network interfacing.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSupports centralized management and configuration for up to 32 Luxul Access Points\u003c\/li\u003e\n\u003cli\u003eUtilizes Roam Assist™ technology to enable active client roaming between APs\u003c\/li\u003e\n\u003cli\u003eFeatures a 1U metal enclosure designed for rack mounting or desktop use\u003c\/li\u003e\n\u003cli\u003eCompatible with Luxul AP models XAP-1610, XAP-1510, XAP-810, XAP-1240, and XAP-1440\u003c\/li\u003e\n\u003cli\u003eFacilitates secure guest networking for diverse deployment environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eThe XWC-2000 is compatible with the Luxul XAP-1610, XAP-1510, XAP-810, XAP-1240, and XAP-1440 models.\u003c\/h3\u003e\u003cp\u003eThe XWC-2000 is compatible with the Luxul XAP-1610, XAP-1510, XAP-810, XAP-1240, and XAP-1440 models.\u003c\/p\u003e\u003ch3\u003eHow many Access Points can be managed by a single XWC-2000?\u003c\/h3\u003e\u003cp\u003eThe controller supports the management and configuration of up to 32 Luxul Access Points.\u003c\/p\u003e\u003ch3\u003eWhat is the primary benefit of the Roam Assist™ technology in the XWC-2000?\u003c\/h3\u003e\u003cp\u003eRoam Assist™ technology enables active client roaming, ensuring mobile devices stay connected while moving between different access points.\u003c\/p\u003e\u003ch3\u003eWhat kind of power connection is required for the XWC-2000?\u003c\/h3\u003e\u003cp\u003eThe unit comes with a US power cord and operates on AC power with a power consumption of 8.6W.\u003c\/p\u003e\u003ch3\u003eWhat mounting options are available for this controller?\u003c\/h3\u003e\u003cp\u003eThe XWC-2000 features a 1U metal enclosure that can be used for either rack mounting or as a standalone desktop unit.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909237702934,"sku":"XWC-2000","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/XWC2000_main.jpg?v=1789975918"},{"product_id":"ac1200-wifi-bridge-range-extender-with-us-power-cord-p40","title":"AC1200 WiFi Bridge + Range Extender with US Power Cord","description":"\u003cp\u003eThe Luxul P40 is an AC1200 WiFi Bridge + Range Extender designed to expand wireless coverage in residential or small office environments. This device plugs directly into a US power outlet, making it a discreet solution for eliminating dead spots in hard-to-reach areas. By utilizing 802.11ac technology, the P40 delivers total data transfers of up to 1200Mbps, with speeds reaching up to 300Mbps on the 2.4 GHz band and 867Mbps on the 5 GHz band. It is compatible with 802.11a\/b\/g\/n\/ac devices and supports both Repeater\/Range Extender Mode and Bridge\/Client Mode. In Bridge\/Client Mode, the P40 acts as a wireless link to connect Ethernet-only devices, such as IP cameras or smart TVs, to a WiFi network. The compact unit features status LEDs that can be set to turn off during normal operation to maintain a clean aesthetic.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDual-band AC1200 performance with up to 867Mbps on 5 GHz and 300Mbps on 2.4 GHz\u003c\/li\u003e\n\u003cli\u003eDual functionality: operates as a wireless repeater or as a bridge\/client for Ethernet-only devices\u003c\/li\u003e\n\u003cli\u003eDirect-to-outlet design for discreet installation in homes or small offices\u003c\/li\u003e\n\u003cli\u003eSupports WPA\/WPA2-PSK and WPA\/WPA2-AES wireless security protocols\u003c\/li\u003e\n\u003cli\u003e802.11ac compliant and compatible with 802.11a\/b\/g\/n legacy devices\u003c\/li\u003e\n\u003cli\u003eFeatures adjustable status LEDs that can be disabled during operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eCan the Luxul P40 connect my wired IP camera to WiFi?\u003c\/h3\u003e\u003cp\u003eYes, using the Bridge\/Client Mode, the P40 wirelessly bridges the connection to Ethernet-only devices like IP cameras or smart TVs.\u003c\/p\u003e\u003ch3\u003eWhat wireless standards does the P40 support?\u003c\/h3\u003e\u003cp\u003eThe P40 supports 802.11ac standards and is backward compatible with 802.11a, b, g, and n devices.\u003c\/p\u003e\u003ch3\u003eDoes the P40 require special mounting hardware?\u003c\/h3\u003e\u003cp\u003eNo, the P40 is designed to plug directly into standard US electrical outlets for simple, hardware-free installation.\u003c\/p\u003e\u003ch3\u003eHow do I know if the status LEDs are working?\u003c\/h3\u003e\u003cp\u003eThe device features status LEDs to indicate operation, though these can be configured to turn off during use to prevent light pollution.\u003c\/p\u003e\u003ch3\u003eIs the P40 TAA compliant?\u003c\/h3\u003e\u003cp\u003eNo, the P40 is not listed as TAA compliant in the manufacturer specifications.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909237866774,"sku":"P40","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/P40a.jpg?v=1789975902"},{"product_id":"5-port-gigabit-desktop-switch-with-us-power-cord-xgs-1005","title":"5-Port Gigabit Desktop Switch with US Power Cord","description":"\u003cp\u003eThe Luxul XGS-1005 is a 5-port unmanaged Gigabit Ethernet switch designed to expand wired networks in multimedia, VoIP, or gaming environments. This desktop switch provides five RJ45 ports capable of 10\/100\/1000Mbps speeds, though it maintains backward compatibility with slower Fast Ethernet devices. It utilizes a non-blocking architecture to ensure efficient data flow, supported by a total switching capacity of 10 Gbps. The device features NWay auto-negotiation and auto-uplink (MDI\/MDI-X) capabilities, which simplify connection setup by eliminating the need for specific crossover cables. For ease of deployment, the XGS-1005 is designed for either desktop placement or wall-mount installation. It operates as a Layer 2 switch with full-duplex flow control to manage traffic effectively. This specific model comes equipped with a US power cord and an external power adapter to provide reliable connectivity for up to five Ethernet-enabled devices.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive 10\/100\/1000Mbps RJ45 ports with a 10Gbps switching capacity\u003c\/li\u003e\n\u003cli\u003ePlug-and-play unmanaged operation with NWay auto-negotiation\u003c\/li\u003e\n\u003cli\u003eNon-blocking architecture with full-duplex flow control\u003c\/li\u003e\n\u003cli\u003eSupports both desktop and wall-mount installation\u003c\/li\u003e\n\u003cli\u003eAuto-uplink (MDI\/MDI-X) for simplified cabling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill the XGS-1005 work with older Fast Ethernet devices?\u003c\/h3\u003e\u003cp\u003eYes, while this is a Gigabit switch, it is fully compatible with existing Fast Ethernet devices in your network.\u003c\/p\u003e\u003ch3\u003eHow can the XGS-1005 be mounted in a professional installation?\u003c\/h3\u003e\u003cp\u003eThis unit is versatile and can be used in either a standard desktop configuration or via wall-mount installation.\u003c\/p\u003e\u003ch3\u003eDoes the XGS-1005 require specialized crossover cables?\u003c\/h3\u003e\u003cp\u003eNo, the XGS-1005 features auto-uplink (MDI\/MDI-X) technology, which automatically detects and configures the connection.\u003c\/p\u003e\u003ch3\u003eWhat is the total switching capacity for this 5-port switch?\u003c\/h3\u003e\u003cp\u003eThe XGS-1005 features a non-blocking architecture with a total switching capacity of 10 Gbps.\u003c\/p\u003e\u003ch3\u003eWhich installation documentation is available for the XGS-1005?\u003c\/h3\u003e\u003cp\u003eInstallers can refer to the Luxul XGS-1005 Quick Install Guide for setup or the XGS-1005 Data Sheet for detailed technical specifications.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909238096150,"sku":"XGS-1005","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/XGS1005_main.jpg?v=1789975916"},{"product_id":"wi-fi-6-ax3600-4x4-multi-gig-access-point-us-ap-3064","title":"Wi-Fi 6 AX3600 4x4 Multi-Gig Access Point - US","description":"\u003cp\u003eThe Luxul AP-3064 is a Wi-Fi 6 AX3600 4x4 Multi-Gig Access Point designed for high-density environments requiring significant device traffic capacity and high data transfer speeds. This indoor access point utilizes 802.11ax technology to provide lower latency and broader coverage compared to previous generations. It features 4x4 concurrent dual-band wireless performance, delivering up to 2400Mbps on the 5 GHz band and up to 1200Mbps on the 2.4 GHz band. For high-speed backhaul, the unit includes a 2.5 Gbps RJ45 PoE+ LAN port (30W). The AP-3064 supports beamforming for improved signal strength and utilizes 4x4 MU-MIMO output to manage multiple simultaneous connections efficiently. For network management, it supports 802.1Q VLAN compliance, allowing installers to create secure guest networks or separate traffic types. The device is TAA compliant and includes a flexible mounting plate design to facilitate precision installation in various indoor settings. It supports WPA2, WPA3, and WPA2\/WPA3 mixed mode-PSK security protocols to maintain robust wireless protection.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e4x4 MU-MIMO and concurrent dual-band 2.4GHz and 5GHz wireless with beamforming\u003c\/li\u003e\n\u003cli\u003e2.5 Gbps RJ45 PoE+ LAN port (30W) for high-speed multi-gig connectivity\u003c\/li\u003e\n\u003cli\u003eAX3600 speeds: up to 2400Mbps @ 5GHz and up to 1200Mbps @ 2.4GHz\u003c\/li\u003e\n\u003cli\u003eVLAN support (802.1Q) for secure guest network segmentation\u003c\/li\u003e\n\u003cli\u003eFlexible mounting plate design for simplified installation\u003c\/li\u003e\n\u003cli\u003eTAA compliant and NDAA 889 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat is the maximum wireless speed for the Luxul AP-3064?\u003c\/h3\u003e\u003cp\u003eThe AP-3064 provides up to 2400Mbps on the 5 GHz band and up to 1200Mbps on the 2.4 GHz band.\u003c\/p\u003e\u003ch3\u003eDoes the AP-3064 support PoE power over Ethernet?\u003c\/h3\u003e\u003cp\u003eYes, this access point requires PoE+ (30W) via its 2.5 Gbps RJ45 LAN port for power.\u003c\/p\u003e\u003ch3\u003eCan I use the Luxul Deployment Tool with this access point?\u003c\/h3\u003e\u003cp\u003eYes, the Luxul Deployment Tool allows you to copy configurations from one AP-3064 to multiple units from a single PC program.\u003c\/p\u003e\u003ch3\u003eWhat wireless security protocols does the AP-3064 support?\u003c\/h3\u003e\u003cp\u003eIt supports WPA2, WPA3, and WPA2\/WPA3 mixed mode-PSK for comprehensive wireless security.\u003c\/p\u003e\u003ch3\u003eIs the AP-3064 suitable for environments with strict compliance requirements?\u003c\/h3\u003e\u003cp\u003eYes, the AP-3064 is TAA compliant and meets NDAA 889 requirements.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909238292758,"sku":"AP-3064","price":855.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/AP-3064_iso_web_bbe58bb4-bbf6-4520-b9cf-22c707d12b4c.jpg?v=1789975901"},{"product_id":"24-port-gb-poe-l2-l3-managed-switch-with-4-sfp-us-power-cord-sw-610-24p-r","title":"24-Port Gb PoE+ L2 L3 Managed Switch with 4 SFP+, US Power Cord","description":"\u003cp\u003eThe SW-610-24P-R is a 24-port PoE+ Gigabit managed switch designed for high-performance network aggregation and distribution. This L2\/L3 switch features a 128 GBPS switching capacity and provides robust management through VLAN, QoS, and other advanced features. For high-bandwidth uplinks, it includes 4 SFP+ ports that support 10 Gigabit connectivity; these ports can be used individually or aggregated to achieve 20Gbps or 40Gbps throughput to an external switch. This specific model features rear-facing ports for cleaner cable management in rack environments and includes a US power cord. For large-scale deployments, the Group Manager allows up to 16 switches from the 510 and 610 series to be managed through a single pane user interface. To maintain a quiet environment, the unit utilizes variable speed fans.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e24 PoE+ Gigabit ports with a 370W total PoE power budget\u003c\/li\u003e\n\u003cli\u003e4 SFP+ 10 Gigabit ports with aggregation support up to 40Gbps\u003c\/li\u003e\n\u003cli\u003eL2 and L3 management capabilities including 802.1Q VLAN compliance\u003c\/li\u003e\n\u003cli\u003ePoE Self-Healing featuring auto-recovery and power scheduling on a per-port basis\u003c\/li\u003e\n\u003cli\u003eRear-facing port configuration and rack-mountable 1.75 in (4.4 cm) height\u003c\/li\u003e\n\u003cli\u003eSingle pane user interface for managing up to 16 switches in the 510\/610 series\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat is the uplink capacity for the SW-610-24P-R?\u003c\/h3\u003e\u003cp\u003eThe switch features 4 SFP+ ports that can be aggregated to provide 20Gbps or 40Gbps throughput to another switch.\u003c\/p\u003e\u003ch3\u003eCan I manage multiple Luxul switches from this device?\u003c\/h3\u003e\u003cp\u003eYes, the Group Manager allows you to manage up to 16 switches within the 510 and 610 series through a single pane user interface.\u003c\/p\u003e\u003ch3\u003eHow much power can I provide to my PoE devices?\u003c\/h3\u003e\u003cp\u003eThe SW-610-24P-R has a total PoE power budget of 370W across its 24 PoE+ ports.\u003c\/p\u003e\u003ch3\u003eDoes this switch support VLAN configuration?\u003c\/h3\u003e\u003cp\u003eYes, this is an L2\/L3 managed switch that is compliant with 802.1Q VLAN standards.\u003c\/p\u003e\u003ch3\u003eWhat is the benefit of the PoE Self-Healing feature?\u003c\/h3\u003e\u003cp\u003eThe PoE Self-Healing feature provides auto-recovery and power scheduling on a per-port basis to ensure device connectivity.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909238784278,"sku":"SW-610-24P-R","price":1715.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/SW61024PR_main_0b7a293d-e789-4801-9f33-3b4371efdc1d.jpg?v=1789975910"},{"product_id":"high-power-ac1900-dual-band-wireless-access-point-with-us-power-cord-xap-1510","title":"High Power AC1900 Dual-Band Wireless Access Point with US Power Cord","description":"\u003cp\u003eThe Luxul XAP-1510 is a high-performance 802.11ac dual-band wireless access point designed to deliver high-speed connectivity for demanding applications like media streaming. Utilizing 3x3 antenna technology, this unit achieves wireless data rates of up to 3100Mbps at 5GHz and up to 600Mbps at 2.4GHz. Integrated Beamforming technology directs signals specifically toward active clients, focusing data transmission rather than radiating equally in all directions. For network management, it supports up to 8 total SSIDs (4 per band) and 802.1Q VLAN compliance, allowing for the creation of secure guest networks. Installation is simplified via a single Ethernet cable that provides both data and power through the integrated PoE+ port; an injector is included in the box for non-PoE installations. The XAP-1510 features a sleek, unobtrusive design for mounting on walls, ceilings, or other flat surfaces, and includes a mounting bracket compatible with most standard electrical boxes.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConcurrent dual-band 802.11ac wireless with speeds up to 3100Mbps (5GHz) and 600Mbps (2.4GHz)\u003c\/li\u003e\n\u003cli\u003e3x3 antenna array with Beamforming for optimized signal direction and coverage\u003c\/li\u003e\n\u003cli\u003eSupports up to 8 total SSIDs (4 per band) and 802.1Q VLAN compliance for secure network segmentation\u003c\/li\u003e\n\u003cli\u003eSimplified installation using a single cable via integrated PoE+ port; PoE injector included\u003c\/li\u003e\n\u003cli\u003eHigh output power and wireless security via WPA\/WPA2-PSK and WPA\/WPA2-AES\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat power options are available for the Luxul XAP-1510?\u003c\/h3\u003e\u003cp\u003eThe XAP-1510 supports both AC power and PoE. It includes a PoE injector to facilitate single-cable installation.\u003c\/p\u003e\u003ch3\u003eWill the XAP-1510 work with my existing PoE switch?\u003c\/h3\u003e\u003cp\u003eYes, it is compatible with PoE+ switches, such as the Luxul AMS-1208P or the SW-615-48P-F, to provide power and data over one cable.\u003c\/p\u003e\u003ch3\u003eWhat is the maximum data rate of this access point?\u003c\/h3\u003e\u003cp\u003eThis unit provides a combined wireless data rate of up to 3100Mbps at 5GHz and up to 600Mbps at 2.4GHz.\u003c\/p\u003e\u003ch3\u003eHow many SSIDs can I configure on the XAP-1510?\u003c\/h3\u003e\u003cp\u003eThe XAP-1510 supports a total of 8 SSIDs, with up to 4 SSIDs available per band.\u003c\/p\u003e\u003ch3\u003eWhere can I find the installation and setup documentation?\u003c\/h3\u003e\u003cp\u003eYou can access the Access Point Setup Guide and the XAP-1510 Firmware Release Notes in the Resources tab for configuration help.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909239013654,"sku":"XAP-1510","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/Luxul-XAP-1510-AngleLft_1df18d59-6f2f-48f0-8777-1a09e1324b94.jpg?v=1789975913"},{"product_id":"apex-wave-2-ac3100-dual-band-access-point-with-us-power-cord-xap-1610","title":"Apex™ Wave 2 AC3100 Dual-Band Access Point with US Power Cord","description":"\u003cp\u003eThe Luxul XAP-1610 is an indoor dual-band access point utilizing 802.11ac Wave 2 technology to support high-density device environments and increased data rates. This unit features 4x4 MU-MIMO and Beamforming across both the 2.4 GHz and 5 GHz wireless frequencies, providing high output power for maximum coverage. It is compatible with all Luxul WiFi controllers, including standalone or embedded configurations, and works alongside Luxul Roam Assist™ Wireless Controllers for managed multi-AP deployments. The XAP-1610 supports up to 8 total SSIDs (4 per band) and includes 802.1Q VLAN compliance to facilitate secure guest network segmentation. For installation, the unit can be mounted on a ceiling, mounted on a wall, or placed on a desktop. It supports single-cable installation using an integrated PoE+ port, though an injector is included for AC power setups. This device is NDAA 889 compliant and meets FCC, IC, RCM, and RoHS standards.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh-performance 802.11ac Wave 2 wireless with data transfers up to 3167Mbps\u003c\/li\u003e\n\u003cli\u003eConcurrent 2.4 GHz and 5 GHz dual-band operation with Beamforming\u003c\/li\u003e\n\u003cli\u003e4x4 MU-MIMO antenna technology for increased device capacity\u003c\/li\u003e\n\u003cli\u003eSupports up to 8 total SSIDs (4 per band) via 802.1Q VLAN compliance\u003c\/li\u003e\n\u003cli\u003eFlexible installation as a ceiling, wall, or desktop-mounted access point\u003c\/li\u003e\n\u003cli\u003ePower options include AC via US Power Cord or PoE+\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat are the power requirements for the XAP-1610?\u003c\/h3\u003e\u003cp\u003eThis access point can be powered via AC using the included US power cord or through a single Ethernet cable using PoE+.\u003c\/p\u003e\u003ch3\u003eWill the XAP-1610 work with my existing Luxul system?\u003c\/h3\u003e\u003cp\u003eYes, it is compatible with all Luxul WiFi controllers, whether they are embedded or standalone, and functions within Luxul Roam Assist™ deployments.\u003c\/p\u003e\u003ch3\u003eHow many SSIDs can I configure on this access point?\u003c\/h3\u003e\u003cp\u003eThe XAP-1610 supports up to 4 SSIDs per band, allowing for a total of 8 SSIDs across both the 2.4 GHz and 5 GHz frequencies.\u003c\/p\u003e\u003ch3\u003eWhat mounting options are available for the XAP-1610?\u003c\/h3\u003e\u003cp\u003eThe unit is designed for versatile installation; it can be mounted on a ceiling, mounted on a wall, or used as a desktop access point.\u003c\/p\u003e\u003ch3\u003eIs the XAP-1610 suitable for creating a guest network?\u003c\/h3\u003e\u003cp\u003eYes, because it supports 802.1Q VLAN compliance, you can segment your network to create a secure, isolated guest wireless network.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909239210262,"sku":"XAP-1610","price":536.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/XAP-1600d_0a96259f-6fc5-4fa8-8817-90e80e627fc3.jpg?v=1789975914"},{"product_id":"ac1200-dual-band-wireless-access-point-with-us-power-cord-xap-810","title":"AC1200 Dual-Band Wireless Access Point with US Power Cord","description":"\u003cp\u003eThe Luxul XAP-810 is an indoor dual-band wireless access point designed to provide high-speed 802.11ac connectivity for demanding applications like streaming media and VoIP. Utilizing 2 x 2 antenna technology and 5GHz Beamforming, this unit delivers wireless data rates up to 1200Mbps @ 5GHz. The device supports concurrent dual-band operation on both 2.4 GHz and 5 GHz frequencies, allowing for optimized traffic management and up to 8 SSIDs. For deployment flexibility, the XAP-810 can function as a standalone access point or as part of a multi-AP system when integrated with the Luxul XWC-1000 Wireless Controller. Installation is streamlined through a single Ethernet cable, as the unit features an integrated PoE+ port for power and data delivery. It supports 802.1Q VLAN compliance and WPA\/WPA2-PSK and WPA\/WPA2-AES security protocols to ensure secure network segmentation and guest access.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConcurrent dual-band technology operating on 2.4 GHz and 5 GHz frequencies\u003c\/li\u003e\n\u003cli\u003eWireless data rates up to 1200Mbps @ 5GHz using 802.11ac 2x2 technology\u003c\/li\u003e\n\u003cli\u003e5GHz Beamforming technology to optimize signal for streaming and VoIP\u003c\/li\u003e\n\u003cli\u003eSupports up to 8 SSIDs for secure guest and private network segmentation\u003c\/li\u003e\n\u003cli\u003eCompatible with Luxul XWC-1000 Wireless Controller for multi-AP deployments\u003c\/li\u003e\n\u003cli\u003eSimplified installation via integrated PoE+ port for power and data over one cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill the Luxul XAP-810 work in a multi-AP environment?\u003c\/h3\u003e\u003cp\u003eYes, the XAP-810 is compatible with the Luxul XWC-1000 Wireless Controller, which helps eliminate roaming issues in multi-AP deployments.\u003c\/p\u003e\u003ch3\u003eHow is the XAP-810 powered?\u003c\/h3\u003e\u003cp\u003eThis access point can be powered via AC using the included US Power Cord or through an integrated PoE+ port using a single Ethernet cable.\u003c\/p\u003e\u003ch3\u003eWhat wireless security protocols does the XAP-810 support?\u003c\/h3\u003e\u003cp\u003eThe XAP-810 supports WPA\/WPA2-PSK and WPA\/WPA2-AES security to help create secure guest networks and private segments.\u003c\/p\u003e\u003ch3\u003eCan I use the XAP-810 to manage different networks?\u003c\/h3\u003e\u003cp\u003eYes, the unit features SSID capability for up to 8 SSIDs and is compliant with 802.1Q VLAN standards for network segmentation.\u003c\/p\u003e\u003ch3\u003eIs the XAP-810 suitable for indoor professional installations?\u003c\/h3\u003e\u003cp\u003eThe XAP-810 is designed for indoor location, featuring a sleek profile for mounting on flat surfaces like ceilings or walls.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909239406870,"sku":"XAP-810","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/XAP-810a_2536c4e4-bc6f-4649-abcd-8ff38197e753.jpg?v=1789975915"},{"product_id":"dual-band-wireless-ac1200-gigabit-router-with-us-power-cord-xwr-1200","title":"Dual-Band Wireless AC1200 Gigabit Router with US Power Cord","description":"\u003cp\u003eThe Luxul XWR-1200 is a high-performance dual-band wireless router designed to provide reliable routing and Wi-Fi coverage for residential homes or small businesses. Utilizing 802.11ac 2x2 MIMO technology, this router delivers wireless data transfers of up to 1200Mbps. It operates on both the 2.4 GHz and 5 GHz frequencies, utilizing 5GHz Beamforming technology to help extend effective signal range. For installers looking to provide whole-home Wi-Fi, the XWR-1200 includes a built-in wireless controller with Luxul’s exclusive Roam Assist™ capability, which allows you to easily add up to two additional wireless access points to the network. This unit supports 802.1Q VLAN compliance and offers various security options including WPA\/WPA2-PSK and WPA\/WPA2-AES. Additionally, the router facilitates secure guest networking and supports VPN remote access. The hardware includes a US power cord and operates within an ambient temperature range of 32° to 122°F (0° to 50°C). For wired connectivity, the device supports a 1Gbps LAN-LAN rate and a WAN-LAN rate of up to 300Mbps.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDual-band 802.11ac Wi-Fi providing wireless data transfers up to 1200Mbps\u003c\/li\u003e\n\u003cli\u003eBuilt-in wireless controller with Roam Assist™ to add up to two additional APs\u003c\/li\u003e\n\u003cli\u003eConcurrent 2.4 GHz and 5 GHz frequencies with 5GHz Beamforming technology\u003c\/li\u003e\n\u003cli\u003eSupports 802.1Q VLAN compliance and secure guest networking\u003c\/li\u003e\n\u003cli\u003eSupports VPN remote access for secure external connectivity\u003c\/li\u003e\n\u003cli\u003eEquipped with 2x2 MIMO antenna type for optimized wireless performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eCan I expand the Wi-Fi coverage with the XWR-1200?\u003c\/h3\u003e\u003cp\u003eYes, the XWR-1200 features Luxul's Roam Assist™ technology, which allows you to add up to two additional wireless access points to create a seamless whole-home Wi-Fi network.\u003c\/p\u003e\u003ch3\u003eWhat are the wired and wireless speeds for this router?\u003c\/h3\u003e\u003cp\u003eThis router supports wireless data transfers up to 1200Mbps using 802.11ac technology. For wired connections, it provides a LAN-LAN rate of 1Gbps and a WAN-LAN rate of up to 300Mbps.\u003c\/p\u003e\u003ch3\u003eDoes the XWR-1200 support VLANs and guest networks?\u003c\/h3\u003e\u003cp\u003eThe XWR-1200 is compliant with 802.1Q VLAN standards and includes features to enable secure guest networking for your clients.\u003c\/p\u003e\u003ch3\u003eWhat wireless security protocols are supported?\u003c\/h3\u003e\u003cp\u003eThe XWR-1200 supports WPA\/WPA2-PSK and WPA\/WPA2-AES wireless security modes to protect the network.\u003c\/p\u003e\u003ch3\u003eWhat power cord is included with the XWR-1200?\u003c\/h3\u003e\u003cp\u003eThis specific model comes equipped with a US power cord and operates on AC power.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909239734550,"sku":"XWR-1200","price":186.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/xwr-1200a.jpg?v=1789975918"},{"product_id":"epic-3-dual-band-wireless-ac3100-gigabit-router-with-us-power-cord-xwr-3150","title":"EPIC 3 - Dual Band Wireless AC3100 Gigabit Router with US Power Cord","description":"\u003cp\u003eThe Luxul XWR-3150 EPIC 3 is a dual-band wireless AC3100 router designed to provide high-performance routing and Wi-Fi coverage for large residential properties or small business environments. This unit utilizes 4x4 MU-MIMO (Wave 2) technology and beamforming across both 2.4 GHz and 5 GHz frequencies to optimize signal delivery. It delivers gigabit wired speeds with 1Gbps WAN-to-LAN and LAN-to-LAN throughput. For installers managing complex environments, the built-in wireless controller utilizes Luxul Roam Assist™ technology, which allows for the addition of up to two additional wireless access points to create a seamless roaming network. The XWR-3150 also supports VPN remote access and enables the creation of up to 8 SSIDs. For enhanced network management, firmware version 7.0.0 or later includes Bark Parental Controls for managing user activity.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProvides gigabit 1Gbps WAN-to-LAN and LAN-to-LAN wired data rates\u003c\/li\u003e\n\u003cli\u003e4x4 MU-MIMO (Wave 2) and beamforming for 2.4 GHz and 5 GHz frequencies\u003c\/li\u003e\n\u003cli\u003eBuilt-in wireless controller with Roam Assist™ supports 2 additional wireless APs\u003c\/li\u003e\n\u003cli\u003eSupports up to 8 SSIDs and enables VPN remote access\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eHow many wireless access points can I add to the XWR-3150?\u003c\/h3\u003e\u003cp\u003eUsing the built-in Luxul Roam Assist™ technology, you can easily add up to two additional wireless APs to expand your coverage.\u003c\/p\u003e\u003ch3\u003eWhat are the wireless capabilities of the EPIC 3 XWR-3150?\u003c\/h3\u003e\u003cp\u003eThe router features concurrent dual-band wireless AC with 4x4 MU-MIMO (Wave 2) technology and beamforming on both 2.4 GHz and 5 GHz bands.\u003c\/p\u003e\u003ch3\u003eDoes the XWR-3150 support gigabit wired connections?\u003c\/h3\u003e\u003cp\u003eYes, this router supports 1Gbps speeds for both WAN-to-LAN and LAN-to-LAN connections.\u003c\/p\u003e\u003ch3\u003eCan I manage parental controls on this router?\u003c\/h3\u003e\u003cp\u003eYes, with firmware version 7.0.0 or later, the XWR-3150 includes built-in Bark Parental Controls.\u003c\/p\u003e\u003ch3\u003eWhat is the maximum transmit power for this device?\u003c\/h3\u003e\u003cp\u003eThe router has a maximum transmit power of 1000mW (30dBm).\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909240619286,"sku":"XWR-3150","price":384.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/xwr-3150a_409e6953-7935-4bbd-8b35-208052a9fcc1.jpg?v=1789975919"},{"product_id":"12-port-8-poe-front-facing-rackmount-switch-with-us-power-cord-xms-1208p","title":"12 Port\/ 8 PoE+ Front-Facing Rackmount Switch with US Power Cord","description":"\u003cp\u003eThe Luxul XMS-1208P is a 12-port managed PoE+ switch designed for professional security and small business network deployments. This rackmount unit features 8 Gigabit 802.3af\/at PoE+ ports with a 130W power budget, providing reliable power for VoIP phones, security cameras, and other PoE-enabled devices. For network backbone connectivity, the switch includes two Gigabit Ethernet uplink ports or two 1 Gigabit SFP ports, allowing for flexible fiber or copper integration. The XMS-1208P offers a 28 Gbps switching capacity and supports Layer 3 static routing and 802.1Q VLAN with trunking to simplify network segmentation. This model is built for silent, fan-less operation and includes PoE Self-Healing with per-port auto-recovery and power scheduling for improved device uptime. It is TAA compliant and features front-facing ports for easier management in a rack environment.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8 Gigabit 802.3af\/at PoE+ ports with a 130W total power budget\u003c\/li\u003e\n\u003cli\u003e28 Gbps switching capacity with 2x Gigabit Ethernet or 2x SFP uplink ports\u003c\/li\u003e\n\u003cli\u003eLayer 3 static routing and 802.1Q VLAN support with trunking\u003c\/li\u003e\n\u003cli\u003ePoE Self-Healing with per-port auto-recovery and power scheduling\u003c\/li\u003e\n\u003cli\u003eFan-less, silent operation for noise-sensitive environments\u003c\/li\u003e\n\u003cli\u003eManaged switch supporting IGMP v1\/2\/3 snooping and MSTP\/RSTP\/STP\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill the XMS-1208P fit my PoE security camera setup?\u003c\/h3\u003e\u003cp\u003eYes, the XMS-1208P provides 8 Gigabit 802.3af\/at PoE+ ports with a total 130W power budget to support multiple PoE-powered security cameras.\u003c\/p\u003e\u003ch3\u003eCan I use fiber optic uplinks with this switch?\u003c\/h3\u003e\u003cp\u003eYes, this switch includes 2 x 1 Gigabit SFP ports that can be used for fiber optic uplinks or as standard Gigabit Ethernet ports.\u003c\/p\u003e\u003ch3\u003eDoes the XMS-1208P support VLAN trunking?\u003c\/h3\u003e\u003cp\u003eThe XMS-1208P supports 802.1Q VLAN compliance with trunking, allowing for effective network segmentation and management.\u003c\/p\u003e\u003ch3\u003eHow does PoE Self-Healing work on this model?\u003c\/h3\u003e\u003cp\u003eThe switch features per-port PoE Self-Healing, which provides auto-recovery and power scheduling to maintain device connectivity.\u003c\/p\u003e\u003ch3\u003eIs the XMS-1208P suitable for government projects?\u003c\/h3\u003e\u003cp\u003eYes, the XMS-1208P is TAA compliant and meets NDAA 889 requirements for professional and compliant installations.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909240848662,"sku":"XMS-1208P","price":615.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/xms-1208p.a.jpg?v=1789975917"},{"product_id":"av-series-12-port-8-poe-gigabit-managed-switch-with-us-power-cord-ams-1208p","title":"AV Series 12-Port\/8 PoE+ Gigabit Managed Switch with US Power Cord","description":"\u003cp\u003eThe Luxul AMS-1208P is a 12-Port\/8 PoE+ Gigabit Managed Switch designed to expand high-performance networks for professional AV applications. This switch features 8 PoE+ ports that support 802.3af\/at standards, providing a total PoE power budget of 130W. To facilitate clean rack integration, the AMS-1208P utilizes rear-facing ports while providing front-facing LEDs with user-selectable blue or green colors. For network expansion and high-speed uplinks, the unit includes 2 Gigabit RJ-45 ports and 2 Gigabit SFP ports. This L2\/L3 managed switch supports Layer 3 static routing between VLANs and features 802.1Q VLAN compliance with a maximum VLAN ID of 4094. The device is TAA compliant and includes a US power cord. It is built to maintain network stability through PoE Self-Healing technology, which provides auto-recovery and power scheduling on a per-port basis.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8 PoE+ ports supporting 802.3af\/at with a 130W power budget\u003c\/li\u003e\n\u003cli\u003e2 Gigabit SFP ports and 2 Gigabit RJ-45 uplink ports\u003c\/li\u003e\n\u003cli\u003eL2\/L3 management with Layer 3 static routing and 802.1Q VLAN support\u003c\/li\u003e\n\u003cli\u003ePoE Self-Healing with per-port auto-recovery and power scheduling\u003c\/li\u003e\n\u003cli\u003eRear-facing ports and user-selectable blue\/green front LEDs\u003c\/li\u003e\n\u003cli\u003eTAA Compliant and NDAA 889 compliant for secure installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWhat is the PoE power budget for the Luxul AMS-1208P?\u003c\/h3\u003e\u003cp\u003eThe AMS-1208P provides a total PoE power budget of 130W across its 8 PoE+ ports.\u003c\/p\u003e\u003ch3\u003eDoes this switch support SFP for fiber connectivity?\u003c\/h3\u003e\u003cp\u003eYes, the AMS-1208P includes 2 x 1 Gigabit SFP ports for fiber-based network expansion.\u003c\/p\u003e\u003ch3\u003eCan I use this switch for VLAN routing?\u003c\/h3\u003e\u003cp\u003eYes, this L2\/L3 managed switch supports Layer 3 static routing between VLANs and is 802.1Q compliant.\u003c\/p\u003e\u003ch3\u003eWhat is the benefit of the PoE Self-Healing feature?\u003c\/h3\u003e\u003cp\u003eThe AMS-1208P features PoE Self-Healing which provides auto-recovery and power scheduling on a per-port basis to maintain device uptime.\u003c\/p\u003e\u003ch3\u003eWhich mounting and installation accessories are available for this switch?\u003c\/h3\u003e\u003cp\u003eThe switch is compatible with the DWR Series Pivoting Wall Rack (DWR-12-26) and can be installed in a 30-inch plastic enclosure with a trim ring (ENP3050NA).\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909241045270,"sku":"AMS-1208P","price":615.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/Luxul-AMS-1208P-1-grn.jpg?v=1789975900"},{"product_id":"16-poe-2-combo-rj45-sfp-ports-1gb-l2-l3-managed-switch-us-power-cord-sw-505-16p-r","title":"16 PoE+ | 2 Combo RJ45\/SFP Ports - 1Gb L2\/L3 Managed Switch, US Power Cord","description":"\u003cp\u003eThe Luxul SW-505-16P-R is a 16-port 1Gb L2\/L3 managed switch designed to support complex AV-over-IP deployments and Dante or AES67 compatible networks. This unit features 16 PoE+ ports with a total power budget of 185W. It includes 2 combo RJ45\/SFP ports for flexible fiber or copper uplinks, providing a total switching capacity of 36 GBPS. This switch supports advanced Layer 2 and Layer 3 capabilities, including static routing and VLAN compliance for up to 4094 VIDs with 802.1Q support and QoS including DCSP. For network stability, it utilizes Spanning Tree protocols including MSTP, RSTP, and STP. A key feature is PoE Self-Healing, which provides per-port basis auto-recovery and power scheduling to maintain uptime for connected devices. This TAA-compliant switch is also NDAA 889 compliant, making it suitable for regulated environments. It includes a US power cord and operates within a temperature range of 32° to 104°F (0° to 40°C). For hardware installation, this 1U device features a 1.75 in (4.4 cm) height and a 14.75 in (37.5 cm) width.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e16 1Gb PoE+ ports with 185 W total power budget\u003c\/li\u003e\n\u003cli\u003eLayer 2\/Layer 3 management with static routing and 802.1Q VLAN support\u003c\/li\u003e\n\u003cli\u003e2 Combo RJ45\/SFP ports for flexible 1 Gigabit uplink connectivity\u003c\/li\u003e\n\u003cli\u003ePoE Self-Healing with per-port auto-recovery and power scheduling\u003c\/li\u003e\n\u003cli\u003eDante and AES67 compatibility for professional AV-over-IP applications\u003c\/li\u003e\n\u003cli\u003eTAA compliant and NDAA 889 compliant for regulated environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill this switch work with my Dante or AES67 AV-over-IP system?\u003c\/h3\u003e\u003cp\u003eYes, the SW-505-16P-R is specifically compatible with Dante and AES67 standards for professional AV-over-IP environments.\u003c\/p\u003e\u003ch3\u003eWhat is the total PoE power budget for the SW-505-16P-R?\u003c\/h3\u003e\u003cp\u003eThe switch provides a 185 W PoE power budget across its 16 PoE+ ports, featuring per-port PoE Self-Healing for auto-recovery.\u003c\/p\u003e\u003ch3\u003eCan I use fiber optic connections with this switch?\u003c\/h3\u003e\u003cp\u003eYes, this model includes 2 combo RJ45\/SFP ports that support 2 x 1 Gigabit SFP connectivity for fiber uplinks.\u003c\/p\u003e\u003ch3\u003eIs the SW-505-16P-R suitable for government or regulated installations?\u003c\/h3\u003e\u003cp\u003eThis switch is TAA compliant and meets NDAA 889 requirements, making it suitable for various regulated environments.\u003c\/p\u003e\u003ch3\u003eWhat management and VLAN features are supported?\u003c\/h3\u003e\u003cp\u003eIt supports L2\/L3 capabilities including static routing, 802.1Q VLAN trunking with up to 4094 VIDs, and QoS support including DCSP.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51909241274646,"sku":"SW-505-16P-R","price":1203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/SW50516PR_main.jpg?v=1789975905"},{"product_id":"24-poe-2-combo-rj45-sfp-front-facing-ports-1gb-l2-l3-managed-switch-sw-505-24p-f","title":"24 PoE+ | 2 Combo RJ45\/SFP Front-Facing Ports - 1Gb L2\/L3 Managed Switch","description":"\u003cp\u003eThe Luxul SW-505-24P-F is a 1Gb L2\/L3 managed switch designed to meet the rigorous demands of modern AV-over-IP deployments. This unit features 24 RJ45 ports located on the front for easy access, providing 24 PoE+ outputs with a total PoE power budget of 370W. It includes 2 combo RJ45\/SFP ports that support 1 Gigabit SFP modules, allowing for flexible fiber or copper uplinks. For professional installers, the SW-505-24P-F offers advanced Layer 2 and Layer 3 capabilities, including static routing and 802.1Q VLAN support with up to 4094 VIDs. The switch is optimized for high-performance media environments, featuring Dante and AES67 compatibility to ensure stability for networked audio. Additionally, it supports Multicast through IGMP v1\/v2\/v3 snooping and querying to prevent network flooding. This TAA compliant switch provides a 52 GBPS switching capacity and supports jumbo frames up to 9216 B for high-bandwidth data transfers.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e24 PoE+ ports with a 370W total power budget and per-port PoE self-healing\u003c\/li\u003e\n\u003cli\u003eLayer 2\/Layer 3 managed capabilities including static routing and 4094 VLAN IDs\u003c\/li\u003e\n\u003cli\u003eOptimized for AV-over-IP with Dante and AES67 compatibility\u003c\/li\u003e\n\u003cli\u003eTwo 1 Gigabit SFP combo ports for versatile fiber or copper connectivity\u003c\/li\u003e\n\u003cli\u003eAdvanced Multicast management with IGMP v1\/v2\/v3 snooping and querying\u003c\/li\u003e\n\u003cli\u003eHigh-performance 52 GBPS switching capacity and 9216 B jumbo frame support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eIs the Luxul SW-505-24P-F suitable for AV-over-IP applications?\u003c\/h3\u003e\u003cp\u003eYes, this switch is specifically designed for AV-over-IP with built-in Dante and AES67 compatibility, alongside IGMP snooping to manage multicast traffic.\u003c\/p\u003e\u003ch3\u003eWhat is the PoE power budget for the SW-505-24P-F?\u003c\/h3\u003e\u003cp\u003eThe switch provides a 370W PoE power budget and features PoE self-healing on a per-port basis to maintain network stability.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between the RJ45 and SFP ports on this model?\u003c\/h3\u003e\u003cp\u003eThe SW-505-24P-F features 24 dedicated PoE+ RJ45 ports and 2 combo ports that can function as either RJ45 or 1 Gigabit SFP ports.\u003c\/p\u003e\u003ch3\u003eDoes the SW-505-24P-F support VLAN trunking?\u003c\/h3\u003e\u003cp\u003eYes, it supports 802.1Q VLAN compliance, allowing for up to 4094 VIDs and full VLAN trunking to segment network traffic.\u003c\/p\u003e\u003ch3\u003eWhich documents are available for submittals for the SW-505-24P-F?\u003c\/h3\u003e\u003cp\u003eInstallers can access the full specification sheet, technical drawings (dwg), and the Quick Installation Guide (QIG) via the resources section.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51916916424982,"sku":"SW-505-24P-F","price":1556.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/SW50524PF_main.jpg?v=1789975906"},{"product_id":"24-poe-2-combo-rj45-sfp-rear-facing-ports-1gb-l2-l3-managed-switch-us-power-cord-sw-505-24p-r","title":"24 PoE+ | 2 Combo RJ45\/SFP Rear-Facing Ports - 1Gb L2\/L3 Managed Switch, US Power Cord","description":"\u003cp\u003eThe Luxul SW-505-24P-R is a high-performance L2\/L3 managed switch engineered to support demanding AV-over-IP environments. This unit features 24 wired 1Gbps data rate ports, including 2 combo RJ45\/SFP ports that provide flexibility for fiber or copper uplinks. With a total switching capacity of 52 GBPS and a 250W PoE power budget, this switch manages significant bandwidth and power requirements for network-connected devices. It is specifically designed for compatibility with Dante and AES67 protocols, making it a robust choice for professional audio and video distribution. This model includes rear-facing ports for organized cable management in rack environments. The switch supports advanced networking features such as IGMP v1\/v2\/v3 snooping and querying, MSTP, RSTP, and STP to ensure efficient multicast traffic handling. Additionally, it supports 802.1Q VLAN trunking with up to 4094 VIDs and inbound ACL filtering for enhanced network security and segmentation.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e24 total ports including 2x 1 Gigabit SFP combo RJ45\/SFP ports\u003c\/li\u003e\n\u003cli\u003eL2\/L3 managed capabilities with static routing and 802.1Q VLAN support\u003c\/li\u003e\n\u003cli\u003e250W PoE power budget with per-port PoE self-healing technology\u003c\/li\u003e\n\u003cli\u003e52 GBPS switching capacity optimized for Dante and AES67 compatibility\u003c\/li\u003e\n\u003cli\u003eAV-over-IP compatible with IGMP snooping and querying support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eIs the Luxul SW-505-24P-R compatible with Dante and AES67?\u003c\/h3\u003e\u003cp\u003eYes, this switch is specifically designed for Dante and AES67 compatibility, making it suitable for professional AV-over-IP deployments.\u003c\/p\u003e\u003ch3\u003eWhat are the PoE capabilities of the SW-505-24P-R?\u003c\/h3\u003e\u003cp\u003eThis switch provides a 250W PoE power budget and features PoE self-healing on a per-port basis to maintain network stability.\u003c\/p\u003e\u003ch3\u003eDoes this switch support SFP modules for fiber connectivity?\u003c\/h3\u003e\u003cp\u003eThe SW-505-24P-R includes 2 x 1 Gigabit SFP combo ports, allowing for both RJ45 and fiber connectivity.\u003c\/p\u003e\u003ch3\u003eWhat VLAN features are supported on this managed switch?\u003c\/h3\u003e\u003cp\u003eIt supports 802.1Q VLAN compliance with up to 4094 VIDs and includes VLAN trunking and inbound ACL filtering.\u003c\/p\u003e\u003ch3\u003eWhat documentation is available for submittals?\u003c\/h3\u003e\u003cp\u003eTechnical details are available in the LUX-SPEC-SW-505-24P-R PDF, and installation guidance can be found in the LUX-SW-505-24P-R_QIG.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51916917145878,"sku":"SW-505-24P-R","price":1488.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/SW50524PR_main_32b6b637-a34e-4e94-98d3-d3dd999668b9.jpg?v=1789975907"},{"product_id":"8-poe-2-rj45-2-sfp-front-facing-ports-1gb-l2-l3-managed-switch-us-power-cord-sw-505-8p-f","title":"8 PoE+ | 2 RJ45 | 2 SFP Front-Facing Ports - 1Gb L2\/L3 Managed Switch, US Power Cord","description":"\u003cp\u003eThe Luxul SW-505-8P-F provides a robust networking foundation for demanding commercial and residential AV-over-IP (AVoIP) environments. This managed Layer 2\/Layer 3 switch is designed to replace the XMS-1208P, offering a refreshed and simplified user interface for easier configuration. It features 8 Gigabit PoE+ ports that deliver up to 30W per port for 802.11af\/at-compliant devices, supported by a 130W total PoE power budget. For high-speed uplinks, the switch includes 2 Gigabit SFP expansion ports, which can be aggregated to achieve a connection speed of up to 2 Gb. Additionally, 2 non-PoE Ethernet ports are provided for standard wired connectivity. This fanless, small form factor switch operates silently, making it an excellent choice for conference rooms, offices, or home theaters where noise is a concern. Advanced multicast management, including IGMP v1\/2\/3 snooping and querying, ensures reliable audio and video transmission across the network. The device is TAA compliant and supports Dante and AES67 protocols, making it a versatile component for professional AV installations.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8 x 1Gb PoE+ ports with a 130W total power budget and 30W per port maximum\u003c\/li\u003e\n\u003cli\u003e2 x 1Gb SFP uplink ports supporting aggregation for up to 2 Gb speeds\u003c\/li\u003e\n\u003cli\u003eLayer 2\/Layer 3 management with static routing and simplified user interface\u003c\/li\u003e\n\u003cli\u003eOptimized for AVoIP, Dante, and AES67 with IGMP v1\/2\/3 snooping and querying\u003c\/li\u003e\n\u003cli\u003eFanless, silent design ideal for quiet environments like conference rooms and theaters\u003c\/li\u003e\n\u003cli\u003eTAA compliant and supports PoE self-healing (Auto-Recovery and Power Scheduling)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill the SW-505-8P-F support my AVoIP and Dante hardware?\u003c\/h3\u003e\u003cp\u003eYes, this switch is specifically designed for AVoIP applications and offers full compatibility with Dante and AES67 standards.\u003c\/p\u003e\u003ch3\u003eCan I use the SFP ports for high-bandwidth uplinks?\u003c\/h3\u003e\u003cp\u003eThe SW-505-8P-F features 2 x 1 Gigabit SFP ports that can be aggregated to provide a connection speed of up to 2 Gb.\u003c\/p\u003e\u003ch3\u003eWhat is the maximum power available for my PoE devices?\u003c\/h3\u003e\u003cp\u003eThis switch provides a total PoE power budget of 130W, with each of the 8 PoE+ ports capable of delivering up to 30W.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between this and the XMS-1208P?\u003c\/h3\u003e\u003cp\u003eThe SW-505-8P-F is the designated replacement for the XMS-1208P, featuring a refreshed user interface and Layer 2\/Layer 3 capabilities.\u003c\/p\u003e\u003ch3\u003eIs there a way to manage PoE power for my connected devices?\u003c\/h3\u003e\u003cp\u003eYes, the switch supports PoE monitoring through Auto-Recovery and Power Scheduling to manage your connected devices effectively.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51916917637398,"sku":"SW-505-8P-F","price":657.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/SW5058PF_main_df3466f8-5f81-475d-96fd-f31a2aac6245.jpg?v=1789975908"},{"product_id":"8-poe-2-rj45-2-sfp-rear-facing-ports-1gb-l2-l3-managed-switch-us-power-cord-sw-505-8p-r","title":"8 PoE+ | 2 RJ45 | 2 SFP Rear-Facing Ports - 1Gb L2\/L3 Managed Switch, US Power Cord","description":"\u003cp\u003eThe Luxul SW-505-8P-R is a managed 1Gbps L2\/L3 switch designed to support demanding professional AV environments. This unit provides 8 PoE+ powered ports, delivering a total PoE power budget of 130 W to support network-connected devices. The rear-facing port configuration includes 2 RJ45 ports and 2 SFP ports, with the SFP ports supporting 1 Gigabit connectivity. This switch is specifically designed for AV-over-IP compatibility and is Dante and AES67 compatible, making it a reliable choice for digital audio networking. \n\nManagement features include a refreshed and simplified user interface for easier configuration. The device supports VLAN compliance up to 802.1Q with a maximum of 4094 VIDs and VLAN trunking, alongside QoS support including DCSP. To ensure network stability, it utilizes Spanning Tree protocols including MSTP, RSTP, and STP. The switch also features IGMP v1\/2\/3 snooping and querying to manage multicast traffic, including per-port unregistered flooding. For added reliability, PoE Self-Healing provides auto-recovery and power scheduling on a per-port basis. This TAA compliant switch is an active lifecycle product suitable for integrated professional installs.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e8 PoE+ powered ports with a 130 W total power budget\u003c\/li\u003e\n\u003cli\u003eLayer 2 and Layer 3 capabilities including static routing\u003c\/li\u003e\n\u003cli\u003eAV-over-IP, Dante, and AES67 compatibility\u003c\/li\u003e\n\u003cli\u003ePoE Self-Healing with per-port auto-recovery and power scheduling\u003c\/li\u003e\n\u003cli\u003eMulticast management via IGMP v1\/2\/3 snooping and querying\u003c\/li\u003e\n\u003cli\u003e2 x 1 Gigabit SFP ports and 2 RJ45 ports (rear-facing)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eanswer\u003c\/h3\u003e\u003cp\u003eYes, this switch is designed with Dante and AES67 compatibility for professional audio-over-IP networking applications.\u003c\/p\u003e\u003ch3\u003eWhat is the PoE power budget for the SW-505-8P-R?\u003c\/h3\u003e\u003cp\u003eThe SW-505-8P-R features 8 PoE+ ports with a total PoE power budget of 130 W.\u003c\/p\u003e\u003ch3\u003eWhat networking protocols does the SW-505-8P-R support for multicast?\u003c\/h3\u003e\u003cp\u003eIt supports IGMP v1\/2\/3 snooping and querying, and includes per-port unregistered flooding to manage multicast traffic.\u003c\/p\u003e\u003ch3\u003eDoes this switch support VLAN trunking?\u003c\/h3\u003e\u003cp\u003eYes, it supports 802.1Q VLAN compliance with a maximum of 4094 VIDs, including VLAN trunking and QoS support via DCSP.\u003c\/p\u003e\u003ch3\u003eWhat SFP modules are compatible with this switch?\u003c\/h3\u003e\u003cp\u003eThe switch includes 2 x 1 Gigabit SFP ports that can be paired with compatible modules, such as the 1GB Multimode Fiber Duplex SFP Module 850nm VCSEL (SKU: 1G-MM-DX-LC).\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51916918325526,"sku":"SW-505-8P-R","price":657.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/SW5058PR_main.jpg?v=1789975909"},{"product_id":"48-poe-4-sfp-ports-1gb-l2-l3-managed-switch-us-power-cord-sw-515-48p-f","title":"48 PoE+ | 4 SFP Ports - 1Gb L2\/L3 Managed Switch, US Power Cord","description":"\u003cp\u003eThe Luxul SW-515-48P-F is a high-performance, 1Gb managed switch designed to support demanding professional AV-over-IP deployments. This switch provides 48 PoE+ ports with a total PoE power budget of 740W, ensuring reliable power delivery for networked devices. It features 4 SFP ports for 1 Gigabit fiber connectivity, providing flexible uplink options. Operating at Layer 2 and Layer 3, this switch supports static routing and provides robust network management through a refreshed and simplified user interface. \n\nFor specialized audio and video integration, the SW-515-48P-F is Dante and AES67 compatible, making it a versatile choice for modern AV networks. Network stability is enhanced through advanced multicast features, including IGMP v1\/v2\/v3 snooping and querying, as well as Spanning Tree protocols (MSTP, RSTP, and STP). Security and segmentation are managed via 802.1Q VLAN support with up to 4094 VIDs and VLAN trunking, alongside inbound and outbound ACL filtering. This TAA-compliant switch is built for reliability in professional environments, offering a switching capacity of 104 Gbps.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e48 PoE+ ports with a 740W total PoE power budget and per-port PoE self-healing\u003c\/li\u003e\n\u003cli\u003eLayer 2\/Layer 3 management including static routing and simplified user interface\u003c\/li\u003e\n\u003cli\u003eDante and AES67 compatibility for professional AV-over-IP applications\u003c\/li\u003e\n\u003cli\u003e4 x 1 Gigabit SFP ports for high-speed fiber connectivity\u003c\/li\u003e\n\u003cli\u003eAdvanced multicast support including IGMP v1\/v2\/v3 snooping and querying\u003c\/li\u003e\n\u003cli\u003eRobust security with 802.1Q VLAN (4094 VIDs) and ACL filtering\u003c\/li\u003e\n\u003cli\u003eTAA Compliant and NDAA 889 compliant for secure installations\u003c\/li\u003e\n\u003cli\u003eHigh-capacity 104 Gbps switching fabric\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eIs the SW-515-48P-F compatible with Dante and AES67 protocols?\u003c\/h3\u003e\u003cp\u003eYes, this switch is specifically designed for AV-over-IP compatibility and supports both Dante and AES67 standards for audio networking.\u003c\/p\u003e\u003ch3\u003eHow much PoE wattage can I pull from this switch?\u003c\/h3\u003e\u003cp\u003eThe SW-515-48P-F provides a total PoE power budget of 740W across its 48 PoE+ ports, featuring per-port PoE self-healing.\u003c\/p\u003e\u003ch3\u003eCan I use 1Gb fiber modules in the SW-515-48P-F?\u003c\/h3\u003e\u003cp\u003eThe switch features 4 SFP ports that support 1 Gigabit SFP modules for fiber connectivity.\u003c\/p\u003e\u003ch3\u003eHow many VLAN IDs can be configured on the SW-515-48P-F?\u003c\/h3\u003e\u003cp\u003eThe switch supports 802.1Q VLAN compliance, allowing for up to 4094 VIDs and full VLAN trunking.\u003c\/p\u003e\u003ch3\u003eWhat are the physical dimensions of the switch?\u003c\/h3\u003e\u003cp\u003eThe switch is a standard 1.75 in (4.4 cm) height unit, with a width of 14.75 in (37.5 cm) and a length of 17.4 in (44.2 cm).\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51916918718742,"sku":"SW-515-48P-F","price":2676.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/SW51548PF_main_cf60fe0f-0770-4512-8a41-b66f932c3e27.jpg?v=1789975910"},{"product_id":"24-poe-4-10g-sfp-ports-1gb-l2-l3-managed-switch-us-power-cord-sw-615-24p-r","title":"24 PoE+ | 4 (10G) SFP+ Ports – 1Gb L2\/L3 Managed Switch, US Power Cord","description":"\u003cp\u003eThe Luxul SW-615-24P-R is a high-performance 1Gb L2\/L3 managed switch designed for professional AV-over-IP deployments. This unit provides 24 wired data rate ports delivering 1Gbps speeds, supported by a total PoE power budget of 370W. To support high-bandwidth uplinks, the switch includes 4 x 10 Gigabit SFP+ ports located on the rear of the chassis. This model features a refreshed, simplified user interface and supports PoE Self-Healing with both auto-recovery and power scheduling on a per-port basis. Network administrators can utilize Layer 2 and Layer 3 capabilities, including static routing, for advanced traffic management. The switch is optimized for modern media environments, offering Dante and AES67 compatibility alongside 802.1Q VLAN and QoS support. It is TAA compliant and includes a US power cord for immediate deployment in North American installations.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e24 1Gbps wired ports with PoE+ support and a 370W power budget\u003c\/li\u003e\n\u003cli\u003e4 x 10 Gigabit SFP+ uplink ports for high-speed fiber connectivity\u003c\/li\u003e\n\u003cli\u003eLayer 2 and Layer 3 management with static routing and 802.1Q VLAN support\u003c\/li\u003e\n\u003cli\u003eAV-over-IP optimized with Dante and AES67 compatibility\u003c\/li\u003e\n\u003cli\u003ePoE Self-Healing feature provides per-port auto-recovery and power scheduling\u003c\/li\u003e\n\u003cli\u003eTAA compliant and supports IGMP snooping and querying for multicast management\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill the Luxul SW-615-24P-R work in an AV-over-IP setup?\u003c\/h3\u003e\u003cp\u003eYes, this switch is AV-over-IP compatible and features Dante and AES67 compatibility for professional audio and video networking.\u003c\/p\u003e\u003ch3\u003eWhat is the total PoE power budget for the SW-615-24P-R?\u003c\/h3\u003e\u003cp\u003eThe switch provides a 370W PoE power budget across its 24 PoE+ ports and features per-port PoE Self-Healing for auto-recovery.\u003c\/p\u003e\u003ch3\u003eDoes this switch support fiber optic uplinks?\u003c\/h3\u003e\u003cp\u003eThe SW-615-24P-R includes 4 x 10 Gigabit SFP+ ports to provide high-speed fiber connectivity for your network backbone.\u003c\/p\u003e\u003ch3\u003eIs the SW-615-24P-R TAA compliant?\u003c\/h3\u003e\u003cp\u003eYes, this model is TAA compliant and meets the requirements for various government and enterprise procurement standards.\u003c\/p\u003e\u003ch3\u003eWhich documents are available for submittals for the SW-615-24P-R?\u003c\/h3\u003e\u003cp\u003eInstallers can access the full product specification PDF, technical drawings in DWG format, and the Quick Installation Guide (QIG) via the resources tab.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51916920520982,"sku":"SW-615-24P-R","price":1801.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/SW61524PR_main_b05ce1cb-4d80-46f4-a89f-009e83468b4f.jpg?v=1789975911"},{"product_id":"48-poe-4-10g-sfp-ports-1gb-l2-l3-managed-switch-us-power-cord-sw-615-48p-f","title":"48 PoE+ | 4 (10G) SFP+ Ports – 1Gb L2\/L3 Managed Switch, US Power Cord","description":"\u003cp\u003eThe Luxul SW-615-48P-F is a high-performance Layer 2\/Layer 3 managed switch designed to meet the demands of complex AV-over-IP deployments. This unit provides 48 wired 1Gbps ports and 4 dedicated 10Gb SFP+ fiber ports for high-bandwidth uplinks. It features a robust 740 W PoE power budget to support various powered devices and includes PoE Self-Healing technology, which offers auto-recovery and power scheduling to maintain network uptime. This switch supports advanced VLAN management, including 802.1Q compliance with up to 4094 VIDs and VLAN trunking, and includes QoS support with DSCP. For specialized AV environments, it offers Dante and AES67 compatibility, alongside IGMP snooping and querying for efficient multicast management. This TAA compliant switch is an ideal core or distribution solution for professional integrators requiring reliable, managed connectivity for large-scale IP networks.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e48 PoE+ ports with a 740 W total power budget and per-port PoE Self-Healing\u003c\/li\u003e\n\u003cli\u003e4 x 10 Gigabit SFP+ ports for high-speed fiber uplinks\u003c\/li\u003e\n\u003cli\u003eLayer 2\/Layer 3 management including static routing and ACL filtering\u003c\/li\u003e\n\u003cli\u003eAV-over-IP compatible with Dante and AES67 support\u003c\/li\u003e\n\u003cli\u003eAdvanced multicast management via IGMP v1\/v2\/v3 snooping and querying\u003c\/li\u003e\n\u003cli\u003eTAA compliant with full 802.1Q VLAN and DSCP support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions\u003c\/h2\u003e\u003ch3\u003eWill the SW-615-48P-F work in an AV-over-IP system?\u003c\/h3\u003e\u003cp\u003eYes, the SW-615-48P-F is AV-over-IP compatible and specifically supports Dante and AES67 protocols for professional audio\/video networking.\u003c\/p\u003e\u003ch3\u003eWhat kind of fiber connectivity can I use with this switch?\u003c\/h3\u003e\u003cp\u003eThe switch includes 4 x 10 Gigabit SFP+ ports. For example, the 10GB-MM-DX-LC 10GB Multimode Fiber Duplex SFP+ Module can be used for 300m runs over OM3 fiber.\u003c\/p\u003e\u003ch3\u003eDoes this switch support PoE auto-recovery?\u003c\/h3\u003e\u003cp\u003eYes, it features PoE Self-Healing technology which provides per-port basis auto-recovery and allows for power scheduling to maintain device connectivity.\u003c\/p\u003e\u003ch3\u003eWhat is the total PoE power capacity of the SW-615-48P-F?\u003c\/h3\u003e\u003cp\u003eThis switch provides a 740 W PoE power budget to support your connected PoE+ devices across the 48 ports.\u003c\/p\u003e\u003ch3\u003eIs the SW-615-48P-F suitable for government projects requiring TAA compliance?\u003c\/h3\u003e\u003cp\u003eYes, this switch is TAA compliant and meets the security requirements outlined in NDAA 889.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications are supplied by the manufacturer. For complete details, check the Resources tab.\u003c\/em\u003e\u003c\/p\u003e","brand":"Luxul","offers":[{"title":"Default Title","offer_id":51916921635094,"sku":"SW-615-48P-F","price":3289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/files\/SW-615-48P-F_main_82b651d9-7cd8-4289-9625-371c174cb21f.png?v=1789975912"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/3437\/6982\/collections\/luxul.jpg?v=1789921450","url":"https:\/\/avsupplies.us\/collections\/brand-luxul\/subcategory-switch-accessories.oembed","provider":"AV Supplies","version":"1.0","type":"link"}